Sears 934.5512559 Checking Timer Programs, To Correct or Cancel Program, Select Item 2DAILY with

DAILY PROGRAM (MONDAY-SUNDAY)

To record a program at the same time on the same chan- nel every day, follow steps [1] to [5] on page 19, then step [6a] below.

1_O3RAM MJtaBER I

Select	item 2(DAILY) with	IENOTIME	_ _1_:._	-
number	buttons.	TAPE SPEED	- -	_]
		I_ILY PROGAAIO
		OATE	--I--

Continue with step [7] on page 20 onwards.

WEEKLY PROGRAM

To record a program at the same time on the same chan- nel every week, follow steps [I] to [5] on page 19, then step [6b] below.

Select item	3(WEEKLY)	_......o,,_E'.,,,". '_-:.
withnumber	buttons.	TAPE SPEED --
		_TE

Continue with step [7] on page 20 onwards.

CHECKING TIMER PROGRAMS

To check a program that is to be recorded using the Automatic Timer Program when the VCR is in the timer-record mode:

1)Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR. (CH 3 or 4)

2)Press POWER/TIMER REC button so that the "@" indicator disappears from the display.

3)Press the TV/VCR button so that "VCR" appears on the display.

4)Follow instructions in steps [2] to [5] on page 19. Information which was set for programming will now appear.

TO STOP RECORDING

Press STOP button on the VCR.

•If you are recording using the Automatic Timer Pro- gram, you may not operate the unit manually, but, you may still stop the recording by pressing STOP/EJECT button on the VCR.

NOTE: STOP button on the remote control will not function in the Automatic Timer Recording mode.

TO CORRECT OR CANCEL

A PROGRAM

•Press ADD/DELETE button to go back one step from current step during steps [5]~[14].

•If you finished setting program, repeat steps [2] to

[4]on page 19. Then press SELECT button repeat- edly until your desired digit flashes and reset pro-

gram.

•You may cancel the entire program by pressing ADD/DELETE button at step [5].

AUTOMATIC TIMER RECORDING HINTS

•If there a power failure or the VCR is unplugged for more than 3 seconds, the clock setting and all timer settings are lost.

•If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape

and the VCR power will be turned off. The "[]" in- dicator will flash.

•If a tape is not inserted or the erase-protection tab is removed, the "@" indicator flashes and automatic

timer recording cannot occur. Insert a tape that al- lows recording.

•The TV that is connected to your VCR may be turned ON or OFF when the VCR is in the timer-record mode.

- 21 - EN

***'if* 5CI6