Sears 934.5512559 owner manual 7rq

QUICK SET PROGRAM

You may set the VCR to start and end recording

PROGRAM button on the VCR. It is easy for you

one program within 24 hours by simply pressing QUICK SET to set the timer for recording today's TV program.

*VCR power must be on to set Quick Set Program.

•Clock must be set to the correct time before setting the timer.

•Quick Set Program controls program number 8.

In the example below, the Quick Set Program is being set to record (current time is 6:00PM):

SETTING		TIME	from	9:30PM	to	11:00PM
CHANNEL			CH61
TAPE	SPEED		LP
NOTE:	This	function	cannot	be done	by	the remote control.

Insert a cassette tape with its safety tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin

recording.)	L_"	0:130:00	_" I
The VCR display will			33

change to the count mode.

Set the channel number. Press CHANNEL • or • button repeatedly or hold it down until your desired

p_ mWEO s C1_ ___

channel number is dis- E_o 1l:13O- G played.

Press	QUICK SET PRO-
ProgramGRAM buttonnumberon the"8"VCRap-.		It.l_ s (. -. :OD,wo,' .- 37 I
pears	on the display.	_ ,

7rq

Set the tape speed.

your desired	tape speed is	l
[displayedPress SPEED..	button until	_° " t°" '

(AUTO-no display, SP, LP or SLP)

Set the desired start time.

edly or hold it down until

Press START button repeat- [ i ,_ your desired start time is dis- L _8 (-

played.

Set the desired end time. Press END button repeat-

edly or hold it down until your desired end time is dis-

played.

- "_°'' ,_

. _:3D _€- 33 J

-I 1:013,,r 37

•The tape speed can be changed at any step from [2] to 15].

GRAM button to return to J'_ O:OD:DtJCN original mode.

Press POWER/TIMER REC button to set Quick Set Program.

This turns the VCR power
off, and the "1_" indicator		,_	_o
lights up on the display. The	L		8:os..
program number "8" is dis-
played with current time.

- 22 -	EN
-or ,k	5CI6