Sears 274.4394859 With a Satellite Receiver Basic Operation, Program the remote for your

Using Your TV and Remote

With a Satellite Receiver: Basic Operation

You may also be able to use the TV's remote with satellite receivers. Refer to your Satellite Receiver owner's manual to hook up your Satellite Receiver. The

remote may need to be programmed for other brands of satellite receivers, but may not operate all models of the brands listed below. Use the codes below or on the sheet packed in with your remote.

Follow the instructions below for basic operation of your receiver. You may also want to experiment with other buttons on the remote to see if they work with your receiver.

Program the remote for your

Satellite Receiver

VO_NEp. VCR1 SAT=CABLE TV

VCR2eLDooAUDIo )

O0

REW PLAYFF

RECSTOPPAUSE

DISPLAYSKIP

Turn on the Satellite

Receiver

MUTE CHA_ PREV CH

Turn off the Satellite

Receiver

INPUTQ 0 0 ANTENNAo

CLEAR ._x.__.,O,pO. RESET

Satellite Receiver Codes

Chaparral		80,81
Cheyenne		81
Drake	.................................	82,83
DSS		00
General	Instruments	...92,93,94
RCA		00
Realistic		84
Sierra	I,II,III	81
STS1		85
STS2		86
STS3		87
STS4		88
Toshiba	...................................	89
Uniden	....................................	90
Video	Cipher II	91

A. Point the remote at the satellite receiver and hold SAT,GABLE.

B. Enter the code for your brand from the code list below.

C. Release SAT,CABLE.

D. Press POWER. If nothing

happens, try pressing SAT.CABLE and then POWER.

A. Press SAT, CABLE to set the remote to control the satellite receiver.

B. Press POWER to turn on the receiver if it did not turn on

when you pressed SAT.CABLE.

A. Press SAT, CABLE to set the remote to control the Satellite receiver.

B. Press POWER to turn off the receiver.

11