Sears 274.4394859 owner manual Startup

Page 5

Quick Guide to Your TV

Startup

5. Adjust PICTURE TILT.

Picture tilt is used to correct a

tilted picture from the effect of the Earth's magnetic field on a large

picture tube. The PICTURE TILT STRENGTH and POLARITY

switches on the back of the TV

compensate for this effect. If the picture appears tilted, follow these steps to improve it.

You may need to reset the switches if the TV is moved or

repositioned in the room.

BACK OF TV

OFF HIGH

LOW

POLARITYSTRENGTH

PICTURE TILT

A. Make sure STRENG'IH switch is in the OFF position.

B. Move STRENGTH switch to the LOW position. If this does not

fully improve tilt, move STRENGTH switch to HIGH.

This should correct tilt. If moving STRENGTH switch makes tilt

worse, return it to OFF and go to the next step.

C. Change the position of POLARITY switch. If this

improves the tilt but does not

fully improve it, move the STRENGTH switch to LOW or

HIGH. This should correct tilt.

6. Place all	available		13	A. Press MENUopROG until the
6. Place all	available		13		Setup menu is selected. This
channels	in memory				Setup menu is selected. This
channels	in memory				menu	is white.
					menu	is white.
(Autoprogram)		Controls Alarm Ad			Press	MOVE • to highlight
Details for adding and deleting		Controls Alarm Ad		B.	Press	MOVE • to highlight
Details for adding and deleting					Autoprogram.
channels are on page 20.					Autoprogram.
channels are on page 20.
				C. Press MOVE I_ to start placing
					channels in the TV's memory.
				Do	Wait until TV has cycled
					through all the channels and
					returns	to original channel.

7. Set the Time12:21 AM13

A. Press MENUopROG until the

Alarm menu is selected. This menu is green.

B. The Clock is automatically highlighted the first time you set it. If it is not, press MOVE • to highlight it.

C. Press MOVE • to set the hour. D. Press MOVE 1_ to set the minutes.

Image 5

Contents Series UseImportant Information Table of Contents Startup Quick Guide to Your TVHook up your TV Plug in the TV Put Batteries in the RemoteStartup Basic Tour of the Remote TV Power ButtonColors Menu BasicsMenu Buttons Moving through the MenusWith Remote Buttons Using Your TV and RemoteVC LD0 Test the remote With VCRs Programming the RemoteProgram the remote for your VCRs CodesSelect the Setup Menu With VCR Setting the VCR1 ChannelChannel Enter channel numberTurn on the VCR With VCRs Basic OperationTurn off the VCR Record one TV program and watch another 0 40 0 0 0 0 0 o0 %Program the remote for your With a Satellite Receiver Basic OperationTurn on the Satellite Receiver Turn off the Satellite ReceiverProgram the remote for your cable box With a Cable Box Programming and Basic OperationFi-I r--i Cable Box CodesHighlight Cable Channel With a Cable Box Setting the Cable ChannelProgram With a Laserdisc Player Programming and Basic OperationRemote for Your Laserdisc Player Basic OperationProgram the remote for audio equipment With Audio Equipment Programming and Basic OperationBasic Operation Audio CodesUse Move I and I to Adjust the Picture Adjusting Your TVOverall Picture Select the Controls MenuPicture Settings Highlight item to change Use Move I* or to adjust each item Sound Settings Stereo, Expanded Stereo, SAP and ToneOff Expanded OffTurn Speakers On or off Sound Settings SpeakersSpeakers Lo Place channels Memory Autoprogram Using Advanced FeaturesPlacing Channels in Memory Autoprogramming Name a channel Naming the ChannelsErase a name Character ListSet Sleep Timer Setting the Sleep TimerCancel the Timer Add more timeTurn on the Alarm Setting the Alarm ClockSet the Alarm Channel Set On and Off TimesCaptioning Select Setting Select Setup menuSelecting a Language Watching Closed CaptioningSelect Cable or Air Setting Your TV for Antenna or CableCable/Air Front Panel Buttons ReferencesDescription Displays on the ScreenScreen Display Trouble Checks Checks and AdjustmentsSound TroubleTabletop Color Television with Remote Control