Using Your TV and Remote
With Audio Equipment: Programming and Basic Operation
Refer to the Connection Book or your Audio equipment owner's manual to hook up your audio equipment. Your remote controls some audio equipment such as a radio, CD player, tape player, turntable, or amplifier. The remote may
need to be programmed for your equipment, but may not operate all models of the brands listed below. Use the codes below or on the sheet packed in with your remote.
Program the remote for audio equipment
90_E _ VCRI SAToCABL E TV
VCR2°LD AUDIO
OQ
REW PLAYFF
REC SlOP PAUSE
DISPLAYSKiP
Basic Operation | MUTE | CHA_4 | PREV CH |
A.Point the remote at the audio equipment and hold AU DID.
B.Enter the code from the code list.
C.Release AUDIO.
D.Press POWER to turn it on. If
nothing happens, try pressing AUDIO and then POWER.
E.Repeat
a.Point the remote at the audio equipment and press AUDIO.
B.Press POWER to turn it on.
C.Use the buttons on the remote that relate to audio functions.
Not all buttons highlighted may work with your equipment.
D.Turn the audio equipment off using the audio component's power off button.
Audio Codes
RCA/Dimensia |
| .:1 |
AM/FM | 03 | I: |
CD | 07 | }" |
Tape | 06 | liii |
Phono | 05 |
|
15