Using Your TV and Remote
With Remote Buttons
pOWER VCRI SAT*CABLE TV
REW PLAYFF
RECSTOP PAUSE
m rT!
DISPLAYSKIP
MUTE | CHAN | PREV CH |
POWER
Turns off the TV.
Turns off compatible components.
Turns on a component after a component button is pressed.
AUDIO, VCR1, VCR2.LD,
SAT.CABLE, TV
Sets the remote to control the
component. VCR2. LD can only be programmed for one component:
either a VCR or a Laserdisc Player.
See Using the Remote with a VCR, Satellite Receiver, Cable Box, Laserdisc Player and Audio equipment on pages
REG (Record)
Starts recording onto tape.
STOP
Stops tape or laserdisc.
PAUSE
Pauses tape or laserdisc.
DISPLAY
Shows displays on the screen. Clears menus from the screen.
SKIP (Commercial Skip) Allows you to scan other
channels during commercials.
Each press adds 30 seconds. TV
10 | 20 |
|
4 0 | 50 | 6 0 |
INPUTQ | 0 0 | ANTENNAo |
CLEAR | _,O, po, | RESET |
qMOVE
TV
Turns on the TV.
Shows the displays on the screen. Sets the remote to control the TV.
See Using the Remote with a VCR, Satellite Receiver, Cable Box, Laserdisc Player and Audio equipment on pages
REW (Rewind)
Rewinds a tape or laserdisc. Searches backward while tape or laserdisc is playing.
PLAY
Plays tape or laserdisc.
FF (Fast Forward)
Fast forwards a tape or laserdisc.
Searches forward while tape or laserdisc is playing.
switches back to original channel when time runs out. Press
CLEAR to cancel SKIP.
CHAN A and v (Channel up and down) Scans up and down through
channels in the TV's memory.
Moves through channels in VCR's memory.
VOL > and <
(Volume up and down) Raises and lowers sound.
MUTE
Switches the TV sound on or off.
PREV CH (Previous Channel)
Changes back and forth between two channels.
Select a channel and then select another. Press PREV OH to switch between the two channels.