Sony SLV-SE250B Tuning the French Catv channels, Channel system for the French Catv network

Page 21

Tuning the French CATV channels

This VCR can scan the CATV channels B to Q and the HYPER frequency channels S21 to S41. On the REGLAGE DES CHAINES menu, the channels are indicated by S01 to S44 REGLAGE CANAL numbers respectively. For example, channel B is indicated by REGLAGE CANAL number S01 and channel Q by REGLAGE CANAL number S23. (See the table below.)

If the CATV channel you want to preset is indicated by its frequency (for example,

152.75MHz), refer to the table below to find the corresponding channel number. Channel number S05 is for this example.

Channel system for the French CATV network

Getting Started

Corresponding	REGLAGE	Receivable
channel	CANAL	frequency
	number	range (MHz)

B	S01	116.75–124.75

C	S02	124.75–132.75

D	S03	132.75–140.75

D	S04	140.75–148.75

E	S05	148.75–156.75

F	S06	156.75–164.75

F	S07	164.75–172.75

G	S08	172.75–180.75

H	S09	180.75–188.75

H	S10	188.75–196.75

I	S11	196.75–204.75

J	S12	204.75–212.75

J	S13	212.75–220.75

K	S14	220.75–228.75

L	S15	228.75–236.75

L	S16	236.75–244.75

M	S17	244.75–252.75

N	S18	252.75–260.75

N	S19	260.75–268.75

O	S20	268.75–276.75

P	S21	276.75–284.75

P	S22	284.75–292.75

Q	S23	292.75–300.75

Corresponding	REGLAGE	Receivable
channel	CANAL	frequency
	number	range (MHz)

S21	S24	299.25–307.25

S22	S25	307.25–315.25

S23	S26	315.25–323.25

S24	S27	323.25–331.25

S25	S28	331.25–339.25

S26	S29	339.25–347.25

S27	S30	347.25–355.25

S28	S31	355.25–363.25

S29	S32	363.25–371.25

S30	S33	371.25–379.25

S31	S34	379.25–387.25

S32	S35	387.25–395.25

S33	S36	395.25–403.25

S34	S37	403.25–411.25

S35	S38	411.25–419.25

S36	S39	419.25–427.25

S37	S40	427.25–435.25

S38	S41	435.25–443.25

S39	S42	443.25–451.25

S40	S43	451.25–459.25

S41	S44	459.25–467.25

Tip

• If you want to return to the previous menu, highlight RETOUR and press OK.

Notes

•The menu disappears automatically if you don’t proceed for more than a few minutes.

•When adjusting ACCORD FIN, the menu may become difficult to read due to interference from the picture being received.

Presetting channels

21

Image 21

Contents Video Cassette Recorder Safety PrecautionsInstalling Compatible colour systemsTable of contents Check your model name UnpackingUsing the remote commander Setting up the remote commanderInserting the batteries You can use this remoteTV control buttons Getting Started If your TV does not have a Peritel connector Connecting the VCRPeritel cable not supplied Signal flow If your TV has a Peritel connectorMains lead LIGNE-1 To mains Aerial cable suppliedIf the connected TV complies with About the Smartlink featuresPress ?/1 MARCHE/VEILLE to turn on the VCR Tuning your TV to the VCRPress Regl Canal on the VCR lightly Press Regl Canal TV system appears in the display windowTo check to see if the TV tuning is correct VCR below Reglage Auto Press Regl CanalTo obtain a clear picture from the VCR Reglage Auto Regl Canal Setting up the VCR with the Auto Set Up function To cancel the Auto Set Up functionPress Reglage Auto Before you start… Selecting a languageTurn on the VCR and the TV Set the TV to the video channel Press M/m to highlight LANGUE, then Press OKPress M/ m to highlight the desired language, then press OK Press Menu to exit the menuTip Presetting channels Press M/m to highlight Reglage DES CHAINES, then press OK CABLE, then press OK Programme position Chaine Press Chaine +/- to selectPress M/m to highlight Reglage CANAL, then press OKIf the picture is not clear Channel system for the French Catv network Tuning the French Catv channelsChanging programme positions Changing/disabling programme positionsPress MENU, then press M/m to highlight Listes and press OK Press M/m to highlight Liste DES CHAINES, then press OKGetting Press MENU, then press M/m to highlight LISTES, and press OK Disabling unwanted programme positionsPress M/ m to highlight the row which you Want to disable Selected row will be cleared as shown Press ANNUL/0On the right Changing the station names Press Setting the clock Setting the clock manuallyPress M/m to highlight HORLOGE, then press OK MANUEL, then press OK Press , to highlight the month and setMonth pressing M/m Tips Reglage Auto is highlighted Changing the station for the Auto Clock Set functionPress m to highlight Chaine ’HORLOGE, then press OK Press M/m to highlight OUI, then press OKConnecting a decoder Setting the Canal Plus decoderSetting the Canal Plus channel Press M/m to highlight OPTIONS-2, then press OKPress M/m to highlight DECODEUR/ LIGNE2, then press OK Menu disappears from the TV screen Press M/m to highlight DECODEUR, then press OKPress M/m to highlight Reglage DES CHAINES, then press OK Press M/m to highlight NORME, then press OKReglage DES Chaines Chaine Press Chaine +/- to select the desiredCANAL+, then press OK Then press OKStop m RET Playing a tapeTo play an NTSC-recorded tape Additional tasksTo set the colour system To use the time counterLecture ENR Stop Recording TV programmesPress x Stop To stop recordingTo check the remaining time To watch another TV programme while recordingTo save a recording Safety tab TipsRecording what you are watching on the TV TV Direct Rec Before you start Recording TV programmes using the Dial TimerTurn Prog to set the recording date To stop the VCR while recording, press x Stop To return to the previous stepTo set the clock To use the VCR after setting the timerAbout the Demonstration Mode To activate the Demonstration ModeTo cancel the Demonstration Mode Recording TV programmes using the ShowView system Press Minuterie VPS/PDC setting appear on the TV screenPress OK Date, start and stop times, programme Position or station name, tape speed*,Timer recording with VPS/PDC signals Press M/m to reset itPress / , to highlight the item you Want to changeTo record satellite broadcasts Setting the timer manually Normale Showview Selectionner Regler Sortie Menu To stop recording Playing/searching at various speeds Ralenti ×2RET Playback options Operation Playback options Operation To resume normal playbackTo cancel the duration Setting the recording duration timeTo extend the duration Additional OperationsBefore you start … Checking/changing/cancelling timer settingsWhen the timer settings overlap Acces Smart Searching using the Acces Smart functionTo recall the latest data screen after you remove the tape Recording the programme D over the programme a and B Originally recorded programmesAdjusting the picture Adjusting the trackingAbout the Optimum Picture Control OPC function Tip Changing menu options PressOK. MENU, then select Options and pressMenu option Set this option to OPTIONS-2 VMC-2121HG Peritel cable not supplied Signal flow How to connect to record on this VCREditing with another VCR Example a Your VCR Recorder LIGNE-1 TV Other VCR PlayerEntree LIGNE-2 Other VCR Player Example B Your VCR RecorderBefore you start editing Operation when recording on this VCRTo stop editing Press the x Stop buttons on both VCRsTroubleshooting Symptom RemedyClock No TV programme appears Plus CanalOthers Additional Information InitialContamination Supplied accessories SpecificationsSystem Inputs and outputsIndex to parts and controls Front panelRefer to the pages indicated in parentheses for details PDC OPC Display windowAntenne Entree connector 8 Rear panelMains lead 8 Remote commander Additional Information Index to parts and controls Additional Information Smartlink Index