Sony SLV-SE450B, SLV-SE250B operating instructions To stop recording

Page 56

To stop recording

To stop the VCR while recording, press x STOP.

Daily/weekly recording

In step 2 above, press m to select the recording pattern. Each time you press m, the indication changes as shown below. Press M to change the indication in reverse order.

AUJOURD. t DIM-SAM (Sunday to Saturday) t LUN-SAM (Monday to Saturday)

tLUN-VEN (Monday to Friday) t SAM (every Saturday) ..... t LUN (every Monday) t DIM (every Sunday) t 1 month later t (dates count down) t DEMAIN t AUJOURD.

Tips

•To set the programme position, you can also use the CHAINE +/– or programme number buttons.

•To set the programme position with a two digit number, press - (ten’s digit) button followed by the programme number buttons.

•To set the line input video source, you can also use the CHAINE +/– buttons.

•To set the tape speed, you can also use the SP/LP button*.

•When you are recording a programme in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the LP mode. Note that some interference will appear on the picture at the point the tape speed is changed. If you want to keep the same tape speed, set VITESSE AUTO. to NON in the OPTIONS-1 menu (page 67).*

•Even if you set OPTIONS PROGRAMM. to SHOWVIEW in the OPTIONS-2 menu, you can set the timer manually. Press MENU to select MINUTERIE, then go to step 2.

•To check, change, or cancel the programme setting, press </, to choose LISTE, then press OK in step 2. For details, see step 3 in “Checking/changing/cancelling timer settings” (page 60).

Notes

•When setting the timer with VPS/PDC signals, enter the start and stop times exactly as indicated in the TV programme guide. Otherwise, the VPS/PDC function won’t work.

•If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC signals, the VCR will start recording at the set time without using the VPS/PDC function.

•The indicator flashes in the display window when you press ?/1 with no tape inserted.

•The VPS/PDC function is automatically set to NON for the timer recording of a satellite programme.

•The station name may not appear if the VCR does not receive station name information signals.

* SLV-SE450B only

56

Setting the timer manually

Image 56

Contents Video Cassette Recorder Precautions SafetyInstalling Compatible colour systemsTable of contents Unpacking Check your model nameSetting up the remote commander Using the remote commanderInserting the batteries You can use this remoteTV control buttons Getting Started Connecting the VCR If your TV does not have a Peritel connectorIf your TV has a Peritel connector Peritel cable not supplied Signal flowMains lead LIGNE-1 To mains Aerial cable suppliedAbout the Smartlink features If the connected TV complies withTuning your TV to the VCR Press ?/1 MARCHE/VEILLE to turn on the VCRPress Regl Canal on the VCR lightly Press Regl Canal TV system appears in the display windowTo obtain a clear picture from the VCR To check to see if the TV tuning is correctVCR below Reglage Auto Press Regl Canal Reglage Auto Regl Canal Press Reglage Auto Setting up the VCR with the Auto Set Up functionTo cancel the Auto Set Up function Selecting a language Before you start…Turn on the VCR and the TV Set the TV to the video channel Press M/m to highlight LANGUE, then Press OKTip Press M/ m to highlight the desired language, then press OKPress Menu to exit the menu Presetting channels CABLE, then press OK Press M/m to highlight Reglage DESCHAINES, then press OK Chaine Press Chaine +/- to select Programme positionPress M/m to highlight Reglage CANAL, then press OKIf the picture is not clear Tuning the French Catv channels Channel system for the French Catv networkChanging/disabling programme positions Changing programme positionsPress MENU, then press M/m to highlight Listes and press OK Press M/m to highlight Liste DES CHAINES, then press OKGetting Disabling unwanted programme positions Press MENU, then press M/m to highlight LISTES, and press OKOn the right Press M/ m to highlight the row which you Want to disableSelected row will be cleared as shown Press ANNUL/0 Changing the station names Press Press M/m to highlight HORLOGE, then press OK Setting the clockSetting the clock manually Month pressing M/m MANUEL, then press OKPress , to highlight the month and set Tips Changing the station for the Auto Clock Set function Reglage Auto is highlightedPress M/m to highlight OUI, then press OK Press m to highlight Chaine ’HORLOGE, then press OKSetting the Canal Plus decoder Connecting a decoderPress M/m to highlight DECODEUR/ LIGNE2, then press OK Setting the Canal Plus channelPress M/m to highlight OPTIONS-2, then press OK Press M/m to highlight DECODEUR, then press OK Menu disappears from the TV screenPress M/m to highlight Reglage DES CHAINES, then press OK Press M/m to highlight NORME, then press OKChaine Press Chaine +/- to select the desired Reglage DES ChainesThen press OK CANAL+, then press OKPlaying a tape Stop m RETAdditional tasks To play an NTSC-recorded tapeTo set the colour system To use the time counterLecture Recording TV programmes ENR StopTo stop recording Press x StopTo check the remaining time To watch another TV programme while recordingSafety tab Tips To save a recordingRecording what you are watching on the TV TV Direct Rec Recording TV programmes using the Dial Timer Before you startTurn Prog to set the recording date To return to the previous step To stop the VCR while recording, press x StopTo use the VCR after setting the timer To set the clockTo cancel the Demonstration Mode About the Demonstration ModeTo activate the Demonstration Mode Recording TV programmes using the ShowView system VPS/PDC setting appear on the TV screen Press MinuteriePress OK Date, start and stop times, programme Position or station name, tape speed*,Press M/m to reset it Timer recording with VPS/PDC signalsPress / , to highlight the item you Want to changeTo record satellite broadcasts Setting the timer manually Normale Showview Selectionner Regler Sortie Menu To stop recording RET Playback options Operation Playing/searching at various speedsRalenti ×2 To resume normal playback Playback options OperationSetting the recording duration time To cancel the durationTo extend the duration Additional OperationsChecking/changing/cancelling timer settings Before you start …When the timer settings overlap Searching using the Acces Smart function Acces SmartTo recall the latest data screen after you remove the tape Originally recorded programmes Recording the programme D over the programme a and BAbout the Optimum Picture Control OPC function Adjusting the pictureAdjusting the tracking Tip Menu option Set this option to Changing menu optionsPressOK. MENU, then select Options and press OPTIONS-2 How to connect to record on this VCR VMC-2121HG Peritel cable not supplied Signal flowEditing with another VCR Example a Your VCR Recorder LIGNE-1 TV Other VCR PlayerExample B Your VCR Recorder Entree LIGNE-2 Other VCR PlayerOperation when recording on this VCR Before you start editingTo stop editing Press the x Stop buttons on both VCRsClock TroubleshootingSymptom Remedy No TV programme appears Others PlusCanal Contamination Additional InformationInitial Specifications Supplied accessoriesSystem Inputs and outputsRefer to the pages indicated in parentheses for details Index to parts and controlsFront panel Display window PDC OPCMains lead 8 Antenne Entree connector 8Rear panel Remote commander Additional Information Index to parts and controls Additional Information Index Smartlink