Sony SLV-SE250B Operation when recording on this VCR, Before you start editing, To stop editing

Page 71
To start editing, press the X (pause) buttons on both VCRs at the same time.

Operation (when recording on this VCR)

Before you start editing

X

• Turn on your TV and set it to the

 

video channel.

 

• Press CHOIX ENTREE to display

 

“L1” or “L2” in the display

 

window.

 

• Press SP/LP to select the tape

 

speed, SP or LP.*

z ENR

1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.

2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press X (pause).

3 Press z ENR on this VCR to set it to recording pause.

4

To stop editing

Press the x STOP buttons on both VCRs.

Tip

To cut out unwanted scenes while editing, press X (pause) on this VCR when an unwanted scene begins. When it ends, press X (pause) again to resume recording.

Note

If you start editing following the procedure above, the VCR won’t start recording with the OPC function. To record a tape with the OPC function, press z ENR again during recording pause in step 3 so the VCR analyses the tape. Then, press X (pause) after the OPC indicator stops flashing to start recording. If you press X (pause) before the OPC indicator stops flashing, the OPC function is cancelled.

* SLV-SE450B only

Additional Operations

Editing with another VCR

71

Image 71
Contents Video Cassette Recorder Compatible colour systems PrecautionsSafety InstallingTable of contents Check your model name UnpackingYou can use this remote Setting up the remote commanderUsing the remote commander Inserting the batteriesTV control buttons Getting Started If your TV does not have a Peritel connector Connecting the VCRTo mains Aerial cable supplied If your TV has a Peritel connectorPeritel cable not supplied Signal flow Mains lead LIGNE-1If the connected TV complies with About the Smartlink featuresPress Regl Canal TV system appears in the display window Tuning your TV to the VCRPress ?/1 MARCHE/VEILLE to turn on the VCR Press Regl Canal on the VCR lightlyTo obtain a clear picture from the VCR To check to see if the TV tuning is correctVCR below Reglage Auto Press Regl Canal Reglage Auto Regl Canal Press Reglage Auto Setting up the VCR with the Auto Set Up functionTo cancel the Auto Set Up function Press M/m to highlight LANGUE, then Press OK Selecting a languageBefore you start… Turn on the VCR and the TV Set the TV to the video channelTip Press M/ m to highlight the desired language, then press OKPress Menu to exit the menu Presetting channels CABLE, then press OK Press M/m to highlight Reglage DESCHAINES, then press OK CANAL, then press OK Chaine Press Chaine +/- to selectProgramme position Press M/m to highlight ReglageIf the picture is not clear Channel system for the French Catv network Tuning the French Catv channelsPress M/m to highlight Liste DES CHAINES, then press OK Changing/disabling programme positionsChanging programme positions Press MENU, then press M/m to highlight Listes and press OKGetting Press MENU, then press M/m to highlight LISTES, and press OK Disabling unwanted programme positionsOn the right Press M/ m to highlight the row which you Want to disableSelected row will be cleared as shown Press ANNUL/0 Changing the station names Press Press M/m to highlight HORLOGE, then press OK Setting the clockSetting the clock manually Month pressing M/m MANUEL, then press OKPress , to highlight the month and set Tips Reglage Auto is highlighted Changing the station for the Auto Clock Set functionPress m to highlight Chaine ’HORLOGE, then press OK Press M/m to highlight OUI, then press OKConnecting a decoder Setting the Canal Plus decoderPress M/m to highlight DECODEUR/ LIGNE2, then press OK Setting the Canal Plus channelPress M/m to highlight OPTIONS-2, then press OK Press M/m to highlight NORME, then press OK Press M/m to highlight DECODEUR, then press OKMenu disappears from the TV screen Press M/m to highlight Reglage DES CHAINES, then press OKReglage DES Chaines Chaine Press Chaine +/- to select the desiredCANAL+, then press OK Then press OKStop m RET Playing a tapeTo use the time counter Additional tasksTo play an NTSC-recorded tape To set the colour systemLecture ENR Stop Recording TV programmesTo watch another TV programme while recording To stop recordingPress x Stop To check the remaining timeTo save a recording Safety tab TipsRecording what you are watching on the TV TV Direct Rec Before you start Recording TV programmes using the Dial TimerTurn Prog to set the recording date To stop the VCR while recording, press x Stop To return to the previous stepTo set the clock To use the VCR after setting the timerTo cancel the Demonstration Mode About the Demonstration ModeTo activate the Demonstration Mode Recording TV programmes using the ShowView system Position or station name, tape speed*, VPS/PDC setting appear on the TV screenPress Minuterie Press OK Date, start and stop times, programmeWant to change Press M/m to reset itTimer recording with VPS/PDC signals Press / , to highlight the item youTo record satellite broadcasts Setting the timer manually Normale Showview Selectionner Regler Sortie Menu To stop recording RET Playback options Operation Playing/searching at various speedsRalenti ×2 Playback options Operation To resume normal playbackAdditional Operations Setting the recording duration timeTo cancel the duration To extend the durationBefore you start … Checking/changing/cancelling timer settingsWhen the timer settings overlap Acces Smart Searching using the Acces Smart functionTo recall the latest data screen after you remove the tape Recording the programme D over the programme a and B Originally recorded programmesAbout the Optimum Picture Control OPC function Adjusting the pictureAdjusting the tracking Tip Menu option Set this option to Changing menu optionsPressOK. MENU, then select Options and press OPTIONS-2 Example a Your VCR Recorder LIGNE-1 TV Other VCR Player How to connect to record on this VCRVMC-2121HG Peritel cable not supplied Signal flow Editing with another VCREntree LIGNE-2 Other VCR Player Example B Your VCR RecorderPress the x Stop buttons on both VCRs Operation when recording on this VCRBefore you start editing To stop editingClock TroubleshootingSymptom Remedy No TV programme appears Others PlusCanal Contamination Additional InformationInitial Inputs and outputs SpecificationsSupplied accessories SystemRefer to the pages indicated in parentheses for details Index to parts and controlsFront panel PDC OPC Display windowMains lead 8 Antenne Entree connector 8Rear panel Remote commander Additional Information Index to parts and controls Additional Information Smartlink Index