Panasonic DMR-EX77 Remote Control, Clock Power Save, Quick Start, DivX Registration, Initialize

Changing the unit’s settings

(continued)

Refer to the control reference on page 64.

Tabs		Menus	Options (Underlined items are the factory presets.)
Others	Remote Control (➡ 22)		≥DVD 1	≥DVD 2	≥DVD 3
	Clock (➡ 73)
	Power Save		≥On: Power consumption is minimized when the unit is turned to
	≥Refer to the following when “Power Save” is set to “On”.		standby (➡ 86).
	–“FL Display” is automatically set to “Automatic” (➡ 67).		≥Off
	–The “Quick Start” function does not work. (It is automatically
	turned to “Off”.)
	≥If “Quick Start” is set to “On”, “Power Save” is automatically
	turned to “Off”.
	Quick Start		≥On
	The Quick Start feature enables this unit to be ready to start		≥Off: Standby power consumption is less than when this is set
	recording as quick as approx. 1 second§ after turning it on. You		to “On”.
	can start recording soon after deciding you want to record
	something.
	§Only when recording to the HDD or DVD-RAM.
	≥If this is set to “On”, “Power Save” is automatically turned to
	“Off”.
	≥Startup takes up to a minute when:
	–You play a disc or start recording to discs other than
	DVD-RAM.
	–You want to make other operations.
	–The clock has not been set.
	DivX Registration		≥You need this registration code to purchase and play DivX
			Video-on-Demand (VOD) content (➡ 39).
	System Update		≥Update data and EPG download information is sent by an
	In order to update this unit’s software, the EPG download, and to		unscheduled digital broadcast. In order to receive these
	support system changes made by broadcasts, this unit		updates, you must be able to receive digital broadcasts.
	periodically performs software updates.		≥An update will take approximately 60 minutes. While the update
	≥Press [OK] to show the following settings.		is in progress, “SW-DL” appears on the unit’s display. You
			cannot operate the unit until the update is complete. Removing
			the AC mains lead while the update is in progress may damage
			the unit.
			≥An EPG download will take approximately 60 minutes. While
			the EPG download is in progress, “GUIDE” appears on the
			unit’s display. The EPG download can be interrupted by
			switching on the unit, since the download will continue in the
			background.
		EPG Download in Standby	≥On: When you set this unit to standby mode, EPG data is
			downloaded automatically.
			≥Off
		Software Update in Standby	≥On: When you set this unit to standby mode, software updates
			are downloaded automatically.
			≥Off
		EPG/Software search period	≥Automatic:	The unit will give priority to searching for EPG
		Selects the time to automatically perform EPG download and	≥02:00–06:00	download and update data at midnight.
		updates when the unit is set to standby mode. This can only
		be set when “EPG Download in Standby” and “Software	≥06:00–10:00
		Update in Standby” is set to “On”.	≥10:00–14:00
		≥If there is a programmed recording set for the time you have	≥14:00–18:00
		selected, the programmed recording will be given priority.	≥18:00–22:00
			≥22:00–02:00
		Software Update Search Now	≥If applicable update data is found, press [2, 1] to select “Yes”
		Start the search for new software manually.	and press [OK].
		A new software version is announced by a message. Do not
		turn your unit off during the update. This could result in the
		loss of data. A message shows that the update has finished.
		If a new software version is not going to be broadcast for the
		next few days, a corresponding message also appears.
	Initialize
	≥Press [OK] to show the following settings.
		Shipping Condition	≥Yes
		All the settings except for the ratings level, ratings password	≥No
		and clock settings return to the factory preset. The timer
		recording programmes are also cancelled.
		Default Settings	≥Yes
		All the settings other than the tuning settings, clock settings,	≥No
		time zone settings, disc language settings, ratings level,

ratings password, remote control code, return to the factory presets.

RQT8859

68