Panasonic DMR-EX87, DMR-EX77 operating instructions On the unit’s display, Messages

Page 75

On the unit’s display

The following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.

 

 

 

 

Page

DVD

≥The remote control and main unit are using different codes. Change the code on the remote control.

22

(“∑” stands for a number.)

 

 

Press and hold [OK] and the indicated number button at the same time for more

 

 

 

 

 

 

 

 

than 5 seconds.

 

 

 

 

 

 

HARD ERR§

≥If there is no change after turning the unit on and off, consult the dealer where the unit was purchased.

—

GUIDE

≥TV Guide data is being downloaded.

68

 

 

 

 

 

NoERAS

≥You cannot delete items on this disc.

—

 

 

The disc may be damaged. Use a new disc.

 

 

 

 

 

 

NoREAD

≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.

10

 

≥This message may appear when the DVD lens cleaner has finished cleaning.

10

 

 

Press [< OPEN/CLOSE] on the main unit to eject the disc.

 

 

 

 

 

 

NoWRIT

≥You cannot write to this disc.

—

 

 

The disc may be damaged. Use a new disc.

 

 

 

 

 

 

PLEASE WAIT§

≥There was a power failure or the AC plug was disconnected while the unit was on. The unit is carrying

—

 

 

out its recovery process. This process restores the unit to normal operation. The unit is not broken.

 

 

 

Wait until the message disappears.

 

 

 

 

 

 

PROG FULL§

≥There are already 32 timer programmes. Delete unnecessary timer programmes.

33

SP 35:50

≥Available space on the HDD or disc.

—

LP 151h

 

The example “SP 35:50” is displayed when less than 100 hours are available and the example “LP

 

“SP”, “LP” and the numbers

 

151h” is displayed when over 100 hours are available.

 

are examples.

 

“SP” and “LP” are recording modes, “35:50” means “35 hours 50 minutes” and “151h” means “151

 

 

 

hours”.

 

 

 

 

 

 

SW-DL

≥The unit is performing a software update.

68

 

 

 

 

 

UNFORMAT§

≥You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL or DVD-RW (DVD-

61

 

 

Video format) that has been recorded on other equipment.

 

 

 

Format the disc to use it.

 

 

 

However all the recorded contents on the disc are deleted.

 

 

 

 

 

 

UNSUPPORT§

≥You have inserted a disc the unit cannot play or record on.

4–6

F74

≥The HDMI connection could not be authenticated due to a transfer malfunction.

—

 

 

Consult the dealer where the unit was purchased.

 

 

 

 

 

 

F75

≥The HDMI connection could not be authenticated due to an internal data malfunction.

—

 

 

Consult the dealer where the unit was purchased.

 

 

 

 

 

 

U59

≥The unit is hot.

—

 

 

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message

 

 

 

disappears.

 

 

 

Select a position with good ventilation when installing the unit. Do not block the cooling fan on the rear

 

 

 

of the unit.

 

 

 

 

 

 

U61

≥(When a disc is not inserted) Displays when a malfunction has occurred during recording, playback or

—

 

 

copy. This is displayed when the unit is in the recovery process to return to normal operation; it is not

 

 

 

broken. Once the display disappears you can use the unit again.

 

 

 

 

 

 

U72

≥The HDMI connection acts unusually.

—

U73

 

–The connected equipment is not HDMI compatible.

 

 

 

–The HDMI cable is too long. Please use a cable 5.0 meters or less.

 

 

 

–The HDMI cable is damaged.

 

 

 

 

 

 

U76

≥HDMI cannot be output because you are connected to a model that does not support copyright

—

 

 

protection.

 

 

 

 

 

 

U80

≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby mode. Now

—

U81

 

press [Í/I] on the main unit again to turn the unit on.

 

U99

 

 

 

 

 

 

 

 

 

U88

≥(When a disc is inserted) Displays when there was something unusual detected with the disc while

78

 

 

recording, playback or copy. This is displayed when the unit is in the recovery process to return to

 

 

 

normal operation; it is not broken. Once the display disappears you can use the unit again.

 

 

 

 

 

 

H or F

≥There is something unusual. (The service number displayed after H and F depends on the unit’s

—

 

 

condition.)

78–83

 

≥Check the unit using the troubleshooting guide. If the service number does not disappear, do the

 

 

following.

 

 

 

1. Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it.

 

 

 

2. Press [Í/I] to turn the power on. (The unit may be fixed.)

 

 

 

If the service number does not disappear despite after doing the above, request service from the

 

 

 

dealer. Inform the dealer of the service number when requesting service.

 

 

 

 

 

 

X HOLD

≥The Child Lock function is activated.

63

 

 

Press and hold [OK] and [RETURN] simultaneously until “X HOLD” disappears.

 

 

 

 

 

 

Messages

RQT8859

§The message are alternately displayed.

75

 

 

Page 74 Page 76
Image 75
Page 74 Page 76
Contents RQT8859-L Model No. DMR-EX77Inside of product This Unit is Intended for USE in Moderate ClimatesTable of contents DVD-Video format HDD, disc and card informationHDD and discs you can use for recording and play DVD Video Recording format+R/+RW Video Recording format HDD, disc and card informationRecording modes and approximate recording times Play-only discs 12 cm/8 cm Discs that cannot be playedHDD, disc and card information DVD-RAM Cards you can use on this unitSuitable SD Cards Structure of folders displayed by this unitImportant notes for recording HDD Hard disk drive handling care Disk drive handling careImportant notes for recording/HDD Hard Unit care Disc and card handlingDisc and card handling/Unit care/Included accessories/The Included accessoriesRemote control information Remote control informationControl reference guide Remote controlOpening the front panel Main unitUnit’s display Control reference guideConnecting a television When the unit is not to be used for a long timeMake sure to use the pair of supplied RF coaxial cables Connection Connecting a television and VCRConnecting an Analogue television and VCR Connecting a Digital television and VCRConnection Connecting an amplifier with a digital input TerminalConnecting a stereo amplifier Other connectionsTelevision’s Connecting to a TVConnecting to a receiver PreparationEasy playback Power on linkPower off link Viera Link Hdavi Control TMEasy control only with Viera remote control Press 3, 4 to select the TV aspect When clock setting screen is displayedPress 3, 4 to select your area Press OKTo enjoy progressive video Press 3, 4 to select ProgressivePress OK Press 3, 4 to select On and pressRefer to the control reference on Set up to match your television and remote controlWhen the following indicator appears on the unit’s display Test by turning on the television and changing channelsPress Status to show the information Screen Watching analogue and digital broadcastsSelect the channel Digital channel informationRecording television programmes Press Drive Select to select the HDD or DVD drivePress ¥ REC to start recording To open the tray without disc finalisation Disc Insertion/EjectionRecording television programmes To finalise the discDirect Navigator Menu Recording television programmesDrive SelectPress 1 Play during recording Flexible RecordingPress 3, 4, 2, 1 to select Start and press OK Playing while you are recordingPress 3, 4, 2, 1 to select the programme Press OK Timer recordingTo cancel a timer recording on the TV Guide screen Press GuideTimer recording Operations in the TV Guide systemPress 3, 4, 2, 1 to select the programme Press G-Code Using G-CODEsystem to make timer recordingsTimer recording REC Mode PROG/CHECK≥HDD Renew Auto Renewal Recording Manually programming timer recordingsPress PROG/CHECK ≥DateTo release the unit from recording standby To cancel recording when recording has already begunPress Drive Select to select the recording drive and press Press 2, 1 to select Stop Recording and press OKCheck, change or delete a programme Relief RecordingAuto Renewal Recording Playing recorded video contents/Playing play-only discs Quick View Operations during playPress Audio Changing audio during playPlaying recorded video Playing DivX discs, MP3 discs and still pictures JpegRegarding DivX discs, MP3 discs and still pictures Jpeg DivX discs, MP3 discs and still pictures JpegPlaying DivX discs Press Direct NavigatorSelecting file type to play Press 3, 4, 2, 1 to select a group and press OK Playing MP3 discsPress 3, 4 to select the track and press OK Playing DivX discs, MP3Press Drive Select to select the HDD, DVD or SD drive Press 3, 4, 2, 1 to selectPlaying still pictures Album and press OKRotate Slide Show SettingUseful functions during still picture play Start Slide ShowUsing on-screen menus/Status message Using on-screen menusPress Display Using on-screen menus/Status message Status messagesPress Status Editing titles/chapters Press 3, 4, 2Editing titles/chapters and playing chapters Partial Delete Set up Protection §Cancel Protection § Title operationsPress Return Creating, editing and playing playlistsCreating playlists Press 2, 1 to select the source title and pressChapter Move Editing and playing playlists/chaptersPlaylist operations AddEditing still pictures Press the Green button to select PicturePress 3, 4 to select the operation and press OK Add Pictures Cancel Protection § Press 2, 1 to select Yes and press OKAlbum and picture operation Press 2, 1 to select Delete and press OKAvailable disc space after deleting Delete NavigatorDeleting titles or pictures during play Press Delete ¢Copying titles or playlists Approximate copying times Max. speedDelete Navigator/Copying titles or playlists Copy Press Function Menu Press 3, 4 to select CopyCopying using the copying list- Advanced Copy Copy Navigator/Copying list icons and functions To return to the previous screenRecording and playing while copying To edit the copying listVIDEO§ HDD DVD-RAM Setting the unit to copy according to the set timeSet Copy Time Copying SD Video from an SD CardTo register individual still pictures Copying using the copying listCopying still pictures Register still pictures for copyPress 3, 4 to select Copy All Copying all the still pictures on a card- Copy All PicturesPress 3, 4 to select To Others Pictures and press OKDV automatic recording DV Auto Rec Copying from a video cassette recorderStart play on the other equipment Press ¥ RECPress Set Entering textShow Enter Name screen Press 3, 4, 2, 1 to select a character and press OKProviding a name for a disc Common proceduresSetting the protection HDD, disc and card managementDeleting all titles and playlists-Delete all titles Deleting all the contents of a disc or card-FormatHDD, disc and card management Selecting the background style-Top MenuEnabling discs to be played on other equipment-Finalise Creating Top Menu-Create Top MenuPress 3, 4 to select an item and press OK To cancel the Child LockFunction Menu window Child LockTabs Menus Changing the unit’s settingsSummary of settings OPEN/CLOSETabs Menus Options Underlined items are the factory presets Changing the unit’s settingsMpeg Changing the unit’s settingsSound DTSGrey Background New Service MessageHdmi Settings§ On-Screen MessagesSoftware Update in Standby Remote ControlClock Power Save System UpdatePress OK to save the newly found channels TuningRefer to the control reference on Signal Condition DVB Manual TuningPress OK to start scan Programme position Analogue Manual TuningPress 3, 4, 2 To select a Press 3, 4 to select the TV system and press OK Press 3, 4 to select Auto-Setup Restart and press OK To change the setting all at once PAL!#NTSC TV SystemTo change the time zone Clock SettingsPress 3, 4 to change the setting Press OK when you have finished the settingsOn the television MessagesMessages On the unit’s displayRegion number be played? Frequently asked questionsSet up Which aerial is suitable for receivingTV Guide Troubleshooting guide Troubleshooting guide Troubleshooting guide When copying, it takes a long Recording, timer recording and copying Cannot recordTimer recording does not stop Even when is pressedPlay Play fails to start even when PasswordYou want to cancel the ratings Copying, deleting and settingPreset UpdatedSome channels, No Signal To reset this unit To return all the settings otherGlossary RGB Specifications Safety precautions Web Site http//panasonic.net RQT8859-L Index
Top Page Image Contents