Panasonic DMR-EX95V manual Connections, Connecting to a television only

Connections

Select the connection pattern that matches your environment from patterns A-E.

Choose from one of the connection types A-E that suits your requirement.

Before connection, turn off all connected equipment and read the appropriate operating instructions.

Use of the supplied RF coaxial cables

To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial cables when you connect this unit to your TV and aerial outlet or aerial cable, as shown in connection types A-E.

!Keep the RF coaxial cables as far away as possible from other cables.

!Do not roll up the RF coaxial cables.

Connecting to a television only A

Connection with 21-pin Scart cable (not provided)

You need a fully wired 21-pin Scart cable for this optimal connection type.

1Connect the aerial to RF IN (Aerial input) of the DVD Recorder.

2Connect RF OUT (Aerial output) of the DVD Recorder with the aerial input of the TV.

3Connect the AV1 terminal (21-pin Scart terminal) of the DVD Recorder with the Scart input of the TV.

4Connect the DVD Recorder and the television to the power supply system.

After completing the above connections, proceed to the Auto-Setup	11
to tune in TV Channels.

RF coaxial cable

1

This unit’s rear panel

RF IN

AV OUT

		COMPONENT VIDEO OUT	Y
	L	S VIDEO OUT	PB
	OPTICAL
	R	VIDEO OUT	PR
AC IN	AUDIO OUT		RF OUT
		AV 2 (EXT)

To household mains socket
(AC 220 V to 240 V, 50 Hz)			3	2
		Fully wired 21-pin			RF coaxial cable
4	AC mains lead	Scart cable			(included)
		(For Q Link functions)
	(included)	17
	Connect only after all other
	connections are complete.
To household		AV IN		RF IN
mains socket		Television’s rear panel

4

10