Panasonic DMR-EX95V manual Remote Control, Child protection, Operating a television

Remote Control

7 m

Remote control signal sensor

Point the remote control at the sensor of the unit. Avoid obstacles along the transmission path. The maximum reach of the remote control is 7 metres directly in front of the unit. Make sure that the transmission window and the sensor on the unit are clean. The process can be impaired by direct sunlight and glass cabinet doors.

Child protection

You can lock the buttons on the unit and the remote control.

!Press and hold the RETURN and ENTER buttons until [X HOLD] appears in the display. The buttons on the unit are locked.

!To unlock the child protection, repeat the process until [X HOLD] disappears.

Operating a television

Change the code on the remote control to control your TV.

!Press and hold the TV on and off button.

!Enter the two-digit code for your television.

Trademark	Code	Trademark	Code	Trademark		Code	Trademark	Code
Panasonic	01-04,45	GOODMANS	05,06,31	NOKIA		25-27	SANYO	21
AIWA	35	GRUNDIG	09	NORDMENDE		10	SBR	06
AKAI	27,30	HITACHI 22,23,31,40-42		ORION		37	SCHNEIDER 05,06,29-31
BLAUPUNKT	09	INNO HIT	34	PHILIPS		05,06	SELECO	06,25
BRANDT	10,15	IRRADIO	30	PHONOLA		31,33	SHARP	18
BUSH	05,06	ITT	25	PIONEER		38	SIEMENS	09
CURTIS	31	JVC	17,39	PYE		05,06	SINUDYNE	05,06,33
DESMET	05,31,33	LOEWE	07	RADIOLA		05,06	SONY	08
DUAL	05,06	METZ	28,31	SABA		10	TELEFUNKEN	10-14
ELEMIS	31	MITSUBISHI	06,19,20	SALORA		26	THOMSON	10,15,44
FERGUSON	10	MIVAR	24	SAMSUNG	31,32,43		TOSHIBA	16
GOLDSTAR/LG 31		NEC	36	SANSUI	05,31,33		WHITEWESTINGHOUSE 05,06

Some television models of the listed brands (e.g. older Panasonic units) cannot be controlled via the remote control.

Switching to AV input on your Panasonic television

!Press AV.

Switches between TV reception and AV input each time the button is pressed.

Setup	Remote Control	DVD 1
Tuning	Clock	Off
Disc	Power Save
Picture	Quick Start	On
Sound	DivX Registration
Display	System Update
Connection
	Initialize
VHS
	Remote Control
Others

DVD 1

DVD 2

DVD 3

SELECT

ENTER

RETURN

Setting up the remote control

If you are using another Panasonic unit at the same location, change the setting of the remote control so that you can operate the units independently of each other.

Set up the remote control for the unit.

!Press FUNCTIONS.

!	Select [To Others] with	and confirm with ENTER.
!	Select [Setup] with	and confirm with ENTER.
!	Select [Others] with	, [Remote Control] with and confirm with ENTER.

!Select [DVD 1, 2 or 3] with and confirm with ENTER.

Apply the selected setting [DVD 1, 2 or 3] to the remote control.

!Press and hold ENTER and press the appropriate number button 1, 2 or 3 for at least 2 seconds.

!Exit the menu with RETURN.

If the remote control setting does not match that of the unit, DVD 1, 2 or 3 appears on the unit’s display.

!Press ENTER and press the appropriate number key 1, 2 or 3 simultaneously for at least 2 seconds.

If you want to operate two units independently of each other using the same remote control, then change the the remote control setting.

6