Panasonic DMR-EX95V Auto Setup, Automatic setup of the unit, Auto-Setup Tuning analogue channels

Auto Setup

Automatic setup of the unit

After being switched on for the first time, the unit proceeds with an automatic station search for digital channels. This is followed by the search for analogue channels.

!Turn on the television and select the AV input that this unit is connected to.

!Switch the unit on using the Standby/on-switch.

1DVB Auto-Setup (Tuning digital channels)

		DVB Auto-Setup
Please wait !		Ch 5			69
Prog. Channel		Service Name	Net ID	TS ID	Quality
1	23	ZDF	12302	12289	9
2	23	Info/3sat	12302	12289	9
3	23	Doku/KiKa	12302 12289		9
4	23	RTL Television	12305 11397		9
5	23	RTL2	12305 11397		9
RETURN : to cancel

Depending on different countries or regions, the digital TV programme has its own selection of operating frequency channels, frequency bands, transmission parameters and frequencies, The unit automatically searches for all available digital television stations.

Active Antenna 69

If an active aerial is connected to the unit, which is energised by the unit, no station was found during auto setup. Switch [Active Antenna] to [On] in the [Setup] menu.

Then repeat the auto setup. After the auto setup, you can check the signal

RETURN

attributes in the [Setup] menu.

64

2Auto-Setup (Tuning analogue channels)

Analogue Auto-Setup in progress.(without Q Link)

Datenübernahme

Analogue Auto-Setup in progress. Please wait. RETURN : to cancel

Download in progress.(with Q Link)

Download in Progress. Please wait.

RETURN : to cancel

Checking Broadcaster's data. (with Q Link)

Checking Broadcaster's data. Please wait. RETURN : to cancel

Analogue Auto-Setup (without Q Link)

The auto setup saves all avaiable television stations and takes approx. 5 minutes. If the station also broadcasts Date and Time, the time will be set automatically. If the automatically set time is incorrect, you can set this manually.

Download from TV with (Registered trademark of Panasonic)

If your television is equipped with the Q Link feature, the stations are downloaded

through the transfer of the station table.
In order to be able to use Q Link, the unit must be connected to a TV with
Q Link or a similar feature via a fully wired 21-pin Scart cable.	70
Checking Broadcaster's data (with Q Link)
Once the station data have been adopted from the television set, the analogue
stations are sorted accordingly.
You can repeat the station search again.	64

Clock

Automatic Off

TimeDate

0 : 00 : 00 1 / 1 / 2006

Number

0 - - 9

Clock cannot be set automatically. CHANGE SELECT Please set the clock manually.

Setting the date and time (if not found automatically)

If the Date and Time are not transferred via a television station, the Clock menu

appears.
! Use	or 0	9 and to select the Time and Date.

!Confirm the change with ENTER.

An incorrect date or time affects the programmed recording of television programmes

ENTER

ENTER : store RETURN : leave

RETURN

(note summer and winter time).

3TV Aspect

TV Aspect

16:9 WIDE TV

16:9

4:3 TV

4:3 Letterbox

SELECT

ENTER

RETURN

!Select the desired screen format with and confirm with ENTER.

Auto setup for your unit is complete.

The availability of stations may differ regionally.

You can now select your favourite stations and store them in the required 20 order in the profiles.

11