Panasonic DMR-EX95V manual SetupETUP Sound Setting, Display Setting

FUNCTIONS

FUNCTIONS		To Others
Setup	Dynamic Range Compression		Off
Tuning	Bilingual Audio Selection		M1
	Digital Audio Output
Disc
	Audio Mode for XP Recording		Dolby Digital
Picture
	Audio Mode for DV Input		Stereo1
Sound
Display
Connection	SELECT	TAB
VHS
Others	ENTER	RETURN

Setup	Digital Audio Output
Tuning	PCM Down Conversion	Off
	Dolby Digital	Bitstream
Disc
	DTS	Bitstream
Picture
Sound	MPEG	PCM
Display	Dolby Digital
Connection
VHS	Bitstream
Others
	PCM

DVD HDD VHS SD

SetupETUP

Sound	Setting	ENTER	Option	ENTER
Dynamic Range Compression		DVD-V[On] [Off] (Dolby Digital Only)

On: The level of quieter passages increases and the level of louder passages decreases. The audio can be clearly understood even when the volume is lowered.

Bilingual Audio Selection -R-R DL -RW(V) +R +R DL +RW [M 1] [M 2]

If you want to record programmes that are broadcast in dual-channel sound, you can select between the original language [M1] or another available language [M2]. If you are copying from an external source or from a tape position, select the sound track on the other unit.

Digital Audio Output	[PCM Down Conversion]
	[Dolby Digital] [DTS] [MPEG]

Select the appropriate setting if you have connected an external unit to the DIGITAL AUDIO OUT of the DVD Recorder.

PCM Down Conversion [On] [Off]

Select the audio output mode for a scan frequency of 96 kHz or 88.2 kHz. Despite this setting, signals are converted to 48 kHz or 44.1 kHz if they have a scan frequency over 96 kHz or 88.2 kHz or if the disc is copy-protected.

On: The connected unit cannot process signals with a scan frequency of 96 kHz or 88.2 kHz. Signals are converted with 48 kHz or 44.1 kHz.

Off: The connected unit can process signals with a scan frequency of 96 kHz or 88.2 kHz. Signals are output as 96 kHz or 88.2 kHz.

Dolby Digital, DTS, MPEG [Bitstream] [PCM]

Bitstream: The connected unit can decode the corresponding signal.

PCM: If the connected unit cannot decode the corresponding signal, the setting must be changed to [PCM]. Otherwise, the loud noise can lead to damage to your hearing or loudspeakers. Make the necessary changes depending on your audio system.

Audio Mode for XP Recording [Dolby Digital] [LPCM]

Selection of the audio type when copying in XP mode.

The picture quality of LPCM recordings may be worse than with normal recordings in XP mode.

Audio Mode for DV Input -R -R DL -RW(V) +R +R DL +RW [Stereo 1] [Stereo 2] [Mix]

Select the audio type when copying from the DV input.

Stereo 1: Original sound; Stereo 2: Voice-over, Mix: Original sound + voice-over

Setup	Language		English
Tuning	On-Screen Messages		5 sec
	Grey Background		On
Disc
	FL Display		Bright
Picture
Sound
Display
Connection	TAB	SELECT
VHS

OthersRETURN

Display	Setting	ENTER	Option	ENTER
Language			[English][Deutsch]
Select the menu language.
On-Screen Messages			[Off][3 sec][5 sec][7 sec][10 sec]
You can set the duration of on-screen displays.
Grey Background			[On] [Off]

On: The grey background is displayed when there is no analogue television reception.

FL Display [Bright] [Dim]

Dim: The display goes dark during playback. It lights up again when a button is pushed. If the unit is switched off, the display turns off.

68