Panasonic DMR-EX95V manual Hdmi

If you need help

Page

HDMI
Which accessories are required	î	Multi-channel sound can only be played back with this unit if it is connected with an
to hear multi-channel Surround		HDMI cable or a digital audio optical fibre cable to an amplifier with an integrated
Sound?		decoder.
Switching on takes longer in spite	î	All units connected by HDMI are checked while switching on.
of the Quick Start function.		This can take a while.
No picture on the television set.	î	Check whether the television set and DVD Recorder are connected correctly with
		the HDMI cable. If the external unit has been connected correctly, the HDMI
	î	message appears briefly on the display of the DVD Recorder.
		If more than four units are connected with HDMI cables, you may possibly not be
	î	able to see a picture. Reduce the number of connected units.
		If the unit is connected via COMPONENT VIDEO OUT to a television unit which is
		not progressive-compatible, no unit can be connected with HDMI. The [Progressive]
		setting is automatically switched to [On] in the Setup if a unit is connected up with	69
		HDMI.
Wrong screen format.	î	If a television set is connected via HDMI AV OUT, in the [Setup] menu, set the	70
	î	setting [Aspect for 4:3 Video] to [4:3].	69
		Check the setting [TV Aspect] in the [Setup] menu.
Part of the picture appears	î	Do not connect this unit to the television set with an HDMI cable.
duplicated some of the time when
	î	In the Setup menu, set the [Progressive] setting to [Off].	69
using the output. COMPONENT
VIDEO OUT
No sound.	î	The amplifier connected via HDMI does not support CPPM and the HDMI Ver. 1.1.
Low volume.		Standard. No Multi Audio-Disc can be played back.
Sound with interference.	î	The sound is not played back if the Bitstream Signal is output from HDMI AV OUT
The required audio type cannot be		or OPTICAL DIGITAL AUDIO OUT.
heard.	î	If more than four units are connected with HDMI cables, you may possibly not hear
	î	any sound. Reduce the number of connected units.
		If the unit is connected with an HDMI cable to a television set and OPTICAL
		DIGITAL AUDIO OUT is used as audio output, in the [Setup] menu, set the setting	70
		[Digital Audio Output] to [Off].
	î
		When one or several units are connected via HDMI AV OUT, it is possible for there
		to be interference with the sound. Select another connection type.
HDAVI Control is not working.	î	In the [Setup] menu, change the setting [Control with HDMI / Q Link] to	70
		[HDMI and Q Link].
	î
		Use a fully wired HDMI cable.
	î	The connected unit possibly does not support HDAVI control.
COPYING
Unusually loud sounds coming	!	When recording or high-speed dubbing to a DVD-R, DVD-RW (DVD-Video format)
from the rotating DVD-R etc.		and +R, the rotation sound is louder than normal. This is not a malfunction.
It is not possible to copy to a	!	When recording to the HDD (Hard disk drive), set [Rec for High Speed dubbing]	66
DVD-R etc. in high-speed mode.	!	in the SETUP menu to [On].
Copying even takes a relatively	!	Depending on the condition of the disc, even high-speedcompatible discs may not
long time in high-speed mode.		allow recording at maximum speed.

82