Panasonic DMR-ES30V Plug-in Auto Tuning, Numeric, buttons, Functions, 3, 4, 2, Enter, S Return

Getting started

STEP 2 Plug-in Auto Tuning

DVD/VHS POWER TV

ÍPOWER

INPUT SELECT	TV/VIDEO CH	VOLUME
VHS	OPERATION	DVD	DVD
	SELECT
		TRACKING/V-LOCK
Numeric			CH, W, X
buttons
		AUDIO

CANCEL/RESET	VCR Plus+ CM SKIP
	PLAY
SKIP/INDEX	SLOW/	FF
	REW SEARCH

DIRECT NAVIGATOR	FUNCTIONS
	PLAY
	FUNCTIONS
TOP MENU	VHS MENU
3, 4, 2, 1
ENTER	RETURN
SUB MENU

S RETURN

SCHEDULE		TIME SLIP
	DISPLAY STATUS	JET REW
REC	REC MODE DVD ERASE	ADD/DLT

ADD/DLT

CREATE

COPYING CHAPTER F.REC

After plugging the unit into your household AC outlet and pressing [Í, DVD/VHS POWER] to turn the unit on for the first time, the unit assists you to set the on-screen language, and automatically tunes in all the channels it can receive and sets the clock.

The unit automatically determines the type of transmission (airwaves or cable) and puts them into channels as follows.

	Band	Channel
Antenna Mode	VHF	2 to 13
(Airwaves)	UHF	14 to 69
	VHF	2 to 13
	CATV LOW BAND	95 to 99
CableTV Mode	CATV MID/SUPER BAND	14 to 36
	CATV HYPER BAND	37 to 65
(Cable)
	ULTRA BAND	66 to 94
		100 to 125
	SPECIAL CATV CHANNEL	1

Preparation

≥Turn on the TV and select the appropriate video input to suit the connections to the unit. (Example: AV input, CH3 or CH4)

≥If you connect the unit through a cable TV box or satellite receiver (l 14), tune to your local PBS for Auto Clock Setting to work.

If there is no local PBS, set the clock manually (l 46, “Set Clock

Manually”). ≥Press [DVD].

The unit’s display

Each time you press the button:

CH 3 (Default setting) (# CH4 (# OFF

^ -----------------------------------------------J

[3]Use [3, 4] to select the language and press [ENTER].

[4]Press [ENTER] to start Plug-in Auto Tuning.

≥The unit then proceeds with Auto Clock Setting. The time is displayed when Auto Clock Setting is finished.

Set Channels Automatically				Set Clock Automatically
			Auto Clock Setting is complete.
	Ch.	1
	Set Channels Automatically
				4/4/2005 12:15 AM
	Proceeding . . .			DST............. On
	1 1 1			Time Zone.... CST
≥DST, Daylight Saving Time, shows the summertime setting.
≥Time Zone shows the time difference from Greenwich Mean
Time (GMT).
	EST (Eastern Standard Time)		l GMT j5
	CST (Central Standard Time)		l GMT j6
	MST (Mountain Standard Time) l GMT j7
	PST (Pacific Standard Time)		l GMT j8
	AST (Alaska Standard Time)		l GMT j9
	HST (Hawaii Standard Time)		l GMT j10
	For other areas: xx hr

[5]Press [ENTER].

∫If the clock is an hour slower or faster than the actual

time

Select “j1” or “i1” in “Adjust Time Zone” in the SETUP menu (l 46).

∫If the unit couldn’t set the clock automatically

Set the time manually (l 46, “Set Clock Manually”).

∫To start Plug-in Auto Tuning again

Signal source, RF output channel, channel caption, and guide channel settings for VCR Plusi system all revert to the default values when you perform the procedure below. Scheduled recording settings are also cleared.

When the unit is on and stopped

[1]Press and hold [CH, W] and [CH, X] on the DVD side of the main unit for about 5 seconds.

The unit turns off.

[2]Press [Í, DVD/VHS POWER] to turn the unit on. Plug-in Auto Tuning starts.

[1]Press [Í, DVD/VHS POWER].

[2] Press [CH, W, X] to
select an RF output	Select Language
	Seleccione la Lengua
channel number.	Sélection de Langue
	English
	Español
Connection (without Audio/
	Français
Video cable):
Select “CH3” or “CH4” which	Press ENTER
	Pulse ENTER
displays the screen on the right.	Appuyer sur ENTER
Connection (with Audio/Video	The unit’s display
cable):
Select “OFF”

16

VQT0N92