Panasonic DMR-ES30V ∫ Removing Interference, 3, 4, 2, 1 2 ENTER, Dvd Ch, W, Functions Vcr/Tv

Getting started

Í

Numeric buttons

:, 9

∫

3, 4, 2, 1 2;, ;1

ENTER

DVD/VHS POWER	TV
	POWER
INPUT SELECT	TV/VIDEO CH	VOLUME

VHS OPERATION DVD

SELECT

TRACKING/V-LOCK

	AUDIO
CANCEL/RESET	VCR Plus+ CM SKIP
SKIP/INDEX	SLOW/
	REW SEARCH FF
	PLAY

DIRECT NAVIGATOR			FUNCTIONS
TOP MENU			VHS MENU
SUB MENU			RETURN
S
SCHEDULE			TIME SLIP
	DISPLAY	STATUS	JET REW
REC	REC MODE DVD ERASE		ADD/DLT
DUBBING		CREATE	VCR/TV
		CHAPTER
VHS	DVD

DVD

CH, W, X

6, 5

1

;

FUNCTIONS

VCR/TV

The unit’s display

Each time you press the button:

CH 3 (Default setting) (# CH4 (# OFF

^ -----------------------------------------------J

≥Set the RF output channel of the DVD Video Recorder to “OFF” (RF OFF) when the DVD Video Recorder is connected to the TV via the Audio/Video cable.

[3]Press [ENTER] to finish this setting.

The clear picture

∫When you set the RF output channel to “CH3” or

“CH4”

A picture is output on CH3 or CH4 from RF output.

Press [VCR/TV] to switch the mode from TV to VCR, and vice versa.

≥When the TV mode is selected, the “TV” indicator lights on the unit’s display and you can watch TV.

∫Removing Interference

Connection (without Audio/Video cable) only

TV screen

≥When the “TV” indicator does not light on, then VCR mode is selected and you can watch images from the unit.

20

Picture with interference

In some cases, interference (lines or patterning) or a very poor picture may appear on the TV when the DVD Recorder is connected. If this happens, follow the steps below to change the video playback channel (RF output channel) to remove the interference.

[1]Press [FUNCTIONS] for more than 5 seconds.

The RF output channel number is displayed on the unit display.

[2]Press [CH, W, X] to select a channel number

(CH3 or CH4).

≥(For example, if the original channel number was 3, enter 4.)

	<Before Changing>					<Before Changing>
	RF Output Channel				RF Output Channel
		Press the channel up/down buttons				Press the channel up/down buttons
		to select a RF Output Channel.				to select a RF Output Channel.
		Ch.	3			Ch. 4
		ENTER				ENTER
		The unit’s display				The unit’s display
				output
							the RF
Indication when the RF					Indication after changing
channel is 3 (example)					output channel to 4 (example)

VQT0N92