Panasonic DMR-E51 manual Timer recording, Using G-CODEnumber to make timer recording

Timer recording

Using G-CODEnumber to make timer recording

[RAM] [DVD-R]

Remote control only

You can easily programme the unit to make a timer recording of a programme by entering the programme’s G-CODEnumber, which can be found in the television sections of newspapers or in television guides. You can programme up to 16 programmes one month in advance. Programmes for everyday or every week are counted as one programme.

Preparation

≥Switch [DVD, TV] (15) to “DVD”.

≥Ensure that this unit’s clock is set correctly.

≥Insert a disc for recording (make sure there is enough room for the programme you are going to record plus a little extra).

1Press [G-Code] (2) button.

G-Code	Remain
			0:59 SP
		12:53:00 12.7 TUE

Enter G-Code Number by using 0-9 key.

	No.
RETURN	0 --9

2Press the numeric buttons (4) to enter the G-CODEnumber.

G-Code	Remain
		0:59 SP
	12:53:00 12.7 TUE

1 1 1 1 1 1 1 1 1

No.

0 --9

RETURN

≥If you enter the wrong digit, use [2] (10) to move back and enter the correct digit.

3Press [ENTER] (10).

≥The Timer Programme Correction screen which allows you to confirm the programme appears and make corrections if necessary.

TIMER				Remain
						1:58 SP
RECORDING
				12:53:00		12.7 TUE
	Name	Date	Start	Stop		Mode
	64 ABC	12/ 7 TUE	1:00	2:00		SP
					Title
	Press ENTER to store new programme.
SELECT		CANCEL	No.
ENTER	RETURN		0 --	9

≥Check the programme.

To make corrections (page 25).

To programme other recordings, repeat steps 1, 2 and 3.

4If the programme is correct

Press [ENTER] (10).

≥The Timer Programme List screen appears.

TIMER					Remain
RECORDING							1:58 SP
						1:19:00	12.7 TUE
	No.	Name	Date	Start	Stop	Mode spaceDisc
	01	64 ABC	12/ 7 TUE	1:19	1:22	SP	OK

New Timer Programme

SELECT

CANCEL

ENTER RETURN

5Press [RETURN] (23).

ªTo put the unit on recording standby

Press [, TIMER] (12).

Ensure “ ” lights on the unit’s display.

24