Panasonic DMR-E51 manual Remote control, Batteries, Use, Television operation

The remote control

Batteries

≥Insert so the poles (- and +) match those in the remote control. ≥Do not use rechargeable type batteries.

R6, AA, UM-3

Do not;

≥mix old and new batteries

≥use different types at the same time ≥heat or expose to flame

≥take apart or short circuit

≥attempt to recharge alkaline or manganese batteries ≥use batteries if the covering has been peeled off

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

If electrolyte leaks from the batteries, consult your dealer.

Wash thoroughly with water if electrolyte comes in contact with any part of your body.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

Replace if the unit does not respond to the remote control even when held close to the front panel.

Use

Aim at the sensor, avoiding obstacles, at a maximum range of 7 m directly in front of the unit.

≥Keep the transmission window and the unit’s sensor free from dust.

≥Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets.

(1)

(2)	20
	20
30
	30

DVD TV

(3)

(1)Remote control signal sensor

(2)7 m directly in front of the unit.

(3)Switch [DVD, TV] (15) to “DVD”.

Do not;

≥put heavy objects on the remote control ≥take the remote control apart

≥spill liquids onto the remote control

Television operation

You can control televisions by changing the remote control code.

Preparation

≥Turn on the television.

≥Switch [DVD, TV] (15) to “TV”.

1Refer to the chart below for the code for your television.

2Press and hold [TV, Í] (14) and enter the two-digit code with the numeric buttons (4).

≥For example: 01, press [0] )[1].

≥After entering the code, test the remote control by turning on the television and changing channels.

Notes

≥If there is more than one code, repeat the procedure until you find the code that allows correct operation.

≥Repeat this procedure after you change the batteries.

≥If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote is not compatible with your television.

List of TVs Compatible with the unit’s Remote Control

Brand:	Code
Panasonic/National	01, 02, 03, 04
SONY	05
TOSHIBA	06
JVC	07
HITACHI	08
MITSUBISHI	09, 10
SHARP	11
PHILIPS, SAMSUNG	12
NEC	13
SANYO	14
GOLDSTAR/LG	15, 16
SAMSUNG	17, 18
SANYO	19

Operation:	Button
On and off:	[TV, Í] (14)
Video input mode:	[AV] (3)
Channels:	[W, X, CH] (18)
Volume:	[i, j, VOLUME] (19)
Numeric:	[0-9, -/--] (4)

7