Remote Setting
Preparations
≥Switch [DVD, TV] (15) to “DVD”.
≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.
1Use [3, 4, 2, 1] (10) to select “SETUP” and press [ENTER] (10).
≥The SETUP screen appears.
|
|
|
|
|
|
FUNCTIONS | Disc Protection | Off | Off |
| |
| Cartridge Protection |
| |||
N |
|
|
|
|
|
S |
|
| N |
|
|
|
| S |
|
| |
|
|
|
|
| |
| DISC INFORMATION | DIRECT NAVIGATOR CREATE PLAY LIST | |||
SELECT | TIMER RECORDING |
|
| PLAY | PLAY LIST |
ENTER |
|
|
|
|
|
RETURN | SETUP |
|
| TOP PLAY | FLEXIBLE REC |
2Use [3, 4] (10) to select the “Settings” tab and press [2] or [1] (10).
(DMR-E51GCS) (DMR-E50GN)
SETUP | DVD 1 | SETUP | DVD 1 |
Remote | Remote | ||
Clock |
| Clock |
|
Shipping Condition | Country | Others | |
Tuning |
| Tuning |
|
Settings |
| Shipping Condition | |
| Settings |
| |
Disc |
| Disc |
|
Picture |
| Picture |
|
Sound |
| Sound |
|
Display | Tab SELECT | Display | Tab SELECT |
Connection | RETURN | Connection | RETURN |
3Use [3, 4] (10) to select “Remote” and press [ENTER] (10).
4Use [3, 4] (10) to select “DVD 1”, “DVD 2” or “DVD 3” and press [ENTER] (10).
≥DVD 1:
Select this setting on both the unit and the remote control for normal use with one unit.
≥DVD 2/DVD 3:
Select this setting on both the unit and the remote control when using this unit and another Panasonic unit in the same place. This ensures that you can operate both units independently with their respective remote control.
It also allows you to operate both units with a single remote control, simply by changing the remote control mode on the remote control.
5To change the remote control mode on the remote control itself, press [ENTER] (10) and the numeric buttons (4) corresponding to the code you want to set, [1], [2] or [3], at the same time for about 2 seconds.
6Press [RETURN] (23).
Changing the unit’s settings (continued)
Operating other Panasonic DVD equipment with the remote control
By changing the remote control code, you can operate other DVD recorders and players manufactured by Panasonic.
Most of the DVD recorders and players manufactured by Panasonic use the same system for their remote controls, so if you operate them in the same place, the controls can be confused by the different pieces of equipment. Use the following procedure to change the remote control code to solve this problem.
≥Use “1”, the factory set code, under normal circumstances.
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
Press [ENTER] (10) and the numeric buttons (4) corresponding to the code you want to set, [1], [2] or [3], at the same time for about 2 seconds.
Notes
≥Be sure to set the same remote control code on the main unit as you did for the remote control itself (page 51, “Settings” — “Remote”).
≥The following display appears on the unit’s display if its code and the remote control’s code are different. Change the remote control’s code to suit the unit.
The unit’s remote control code
≥The display disappears after about 5 seconds.
55