Panasonic DMR-E51 manual To check programmes, Starting and canceling programmes

Timer recording (continued)

To check programmes

[RAM] [DVD-R]

Press [PROG/CHECK] (13).

The Timer Programme List screen appears.

	TIMER					Remain		1:58 SP
	RECORDING
							1:19:00	12.7 TUE
	No.	Name		Date	Start	Stop	Mode spaceDisc
	01	64	ABC	12/ 7 TUE	1:19	1:22	SP	OK
A	W 02	64	ABC	12/ 7 TUE	1:20	2:20	SP	OK
	F 03	64	ABC 20/ 7 WED		8:00	9:00	SP	OK
	04	64	ABC 20/ 7 WED		9:00	10:00	SP	OK
	X 05	64	ABC 20/ 7 WED		10:00	11:00	SP	OK
				New Timer Programme
	SELECT
				CANCEL
	ENTER		RETURN

Icon explanations (A)

¥This programme is currently recording.

WThe programme is overlap with another programme.

FThe disc was full or the maximum number of programmes or scenes was reached so the programme failed to record.

The television programme was copy-guarded so the programme failed to record.

TV system of the programme is different from the setting in SETUP, so the programme failed to record.

XThe programme did not complete recording because the disc is dirty or some other reason.

Disc space

OK:Displayed if the recording can fit in the remaining space on the disc.

#(Date): For recordings made daily or weekly, the display will show until when recordings can be made based on the time remaining on the disc.

!:Displayed if the disc is not inserted in the unit or is write-protected (pages 30 and 64) or there is not enough memory capacity left on the disc.

ªTo change the programme

(page 26)

ªTo exit from the Timer Programme List screen

Press [PROG/CHECK] (13) or [RETURN] (23). (The television is shown.)

For your reference

≥Programmes that failed to record are deleted from the list at 4 a.m. the day after tomorrow.

Starting and canceling programmes

[RAM] [DVD-R]

ªTo put the unit on recording standby

Press [, TIMER] (12).

The unit turns off and “” lights on the unit’s display.

Note

≥The unit cannot go to timer recording standby if the disc is protected (pages 30 and 64) or full (“” flashes). Check the disc carefully.

ªTo release the unit from recording standby

If you want to record something else before the programme start time, for example:

Press [, TIMER] (12).

The unit turns on and “” goes out.

≥Be sure to press [, TIMER] (12) before the programme start time to put the unit on recording standby. The programme only works if “” is on.

ªTo stop recording while a programme is working Press [, TIMER] (12).

To clear a timer recording programme

[RAM] [DVD-R]

Press [CANCEL] (5) or [ERASE] (30) while the programme’s Timer Programme Correction screen is being shown.

(Alternatively, use [3, 4] (10) to select the programme in the Timer Programme List screen and press [CANCEL] (5) or [ERASE] (30).)

≥You can not delete programmes that are currently recording.

27