Sony TV Receiver, 412 quick start Connect NetAV from a Wired LAN, LF-X1 LF-X5

Page 14

Step 6b

Connect NetAV from a Wired LAN

1Connect the Ethernet cable to the LAN port on the monitor.

LF-X1

LF-X5

2Go to Settings > Monitor. In the On the go section, select Wired LAN A.

A

Settings > Monitor

3Press the Index button and select Web to open up the LocationFree TV browser. Some networks require a login. If a login is required, you will be redirected to the login page. Enter your name, password or go to the signup page to finish logging in.

4Go to TV or Video and select NetAV to start!

A dialog box will show that you are Connecting, then > Authenticating > Buffering.

Shortly the picture will appear. Enjoy!

14

Page 13 Page 14
Image 14
Page 13 Page 14
Contents LocationFree TV Contents Overview MonitorOnly Setup SummaryBefore You Go Out One Time Setup From OutsideNetwork connection Internet Protocol IP Address Step Check Your Current Network Set UpRouter setting FirewallRegistering with a Dynamic Domain Name Service Ddns Step Obtain a Dynamic Domain NamePage Step Configure LocationFree TV for Ddns PasswordStep Configure LocationFree TV for Your Home Router Settings Base station NetAV Settings Enable/Disable NetAV Step Configure Your Home Router Setting up the LinkSys WRT54G router Confirming your set upConnect NetAV from a Hotspot HotspotShortly the picture will appear. Enjoy Connect NetAV from a Wired LAN LF-X1 LF-X5
Top Page Image Contents