Sony TV Receiver, 412 quick start Contents

Page 2

Contents

Overview

3

Setup Summary

4

Step 1: Check Your Current Network Set Up

5

Step 2: Obtain a Dynamic Domain Name

6

Step 3: Configure LocationFree TV for DDNS

8

Step 4: Configure LocationFree TV for Your Home Router

9

Step 5: Configure Your Home Router

11

Step 6a: Connect NetAV from a Hotspot

12

Step 6b: Connect NetAV from a Wired LAN

14

© 2005 Sony Electronics Inc. All rights reserved. Sony and LocationFree are trademarks of Sony. Linksys is a registered trademark of Cisco Systems Inc. www.dyndns.org is a service mark of Dynamic Networks Services Inc. All other marks are property of their respective owners.

2

Image 2
Contents LocationFree TV Contents Overview MonitorOnly Setup SummaryBefore You Go Out One Time Setup From OutsideNetwork connection Internet Protocol IP Address Step Check Your Current Network Set UpRouter setting FirewallRegistering with a Dynamic Domain Name Service Ddns Step Obtain a Dynamic Domain NamePage Step Configure LocationFree TV for Ddns PasswordStep Configure LocationFree TV for Your Home Router Settings Base station NetAV Settings Enable/Disable NetAV Step Configure Your Home Router Setting up the LinkSys WRT54G router Confirming your set upConnect NetAV from a Hotspot HotspotShortly the picture will appear. Enjoy Connect NetAV from a Wired LAN LF-X1 LF-X5