Step 3
Configure LocationFree TV for DDNS
1Make sure your LocationFree TV is connected in the Home/Wireless mode.
2In the Settings menu, go to Base station > NetAV Settings > Dynamic DNS. Enter the following information in the appropriate field.
A User ID | Enter the Username you registered in DynDNS |
B Password | Enter the Password you registered in DynDNS |
CURL to update DNS information If your registered Host/Domain name is YourName.dnsalias.com, enter http://members.dyndns.org/nic/update?hostname= YourName.dnsalias.com
D URL to detect IP address | Enter http://checkip.dyndns.org:8245/ |
E Set button | Select the Set button |
A
B
C
D
E
Settings > Base station > NetAV Settings > Dynamic DNS
3Select the Back button and again select Dynamic DNS. Check that the data is showing as entered. If the data has changed, repeat step 2 on this page. Then check the Current status field as follows:
|
|
|
|
| A |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| Success | Your Dynamic DNS is successfully configured. The system is automatically | |||
|
| checking IP addresses currently assigned to your base station. Wait at least 10 | |||
|
| minutes before going to Step 4 on page 9. | |||
|
|
|
|
|
|
| Failure | The Dynamic DNS configuration failed or communication to the server failed. | |||
|
| Try repeating Steps | |||
|
| 10 minutes at the DDNS provider. Wait 10 minutes before trying again | |||
|
|
|
|
|
|
| Updating | The system is still trying to correctly configure. Try waiting a few more minutes; | |||
|
| the current status will soon indicate “success” or “failure.” If the Current status | |||
|
| field does not change, repeat Step 2 on page 6. | |||
|
|
|
|
|
|
8