Setting Up Your Digital Satellite Receiver (SYSTEM) (continued)
ALT AUDIO JUMP
FAVORITE INDEX CATEGORY GUIDE
VOL MENUCH
EXIT
CODE SET VTR3 2 DVD AMP |
SATELLITE
RECEIVER
Remote Control
Remote Signal
Lets you select IR or RF as the type of signal the receiver accepts.
RF Security Control
Lets you change the security code. RF signals are used to control many devices. You may need to change the security code so that this remote control operates the Digital Satellite Receiver only.
Selecting RF or IR Remote Control Reception (SAT-A55 only)
The RF feature allows you to operate the Digital Satellite Receiver from outside a cabinet or from another room within your home. The RF Antenna must be connected to use the RF feature (see page 12).
1 | Press the MENU button, then highlight and select |
| SYSTEM. |
The SYSTEM pop-up appears.
MENU
2 | Highlight and select “Remote Control”. |
The Remote Control display appears. |
Return
Closes the Remote Control display to show the Main Menu.
Help
Opens information about the
Remote Control display.
3 | Highlight and select “Remote Signal”. |
The Remote Signal |
32