Setting Up Your Digital Satellite Receiver (SYSTEM) (continued)
Note
If the remote control no longer operates your Digital Satellite Receiver after completing this procedure, use the controls on the front panel to open the Remote Control display (see page 32). Then repeat the steps in “Setting the Security Code” to try again.
3Select “Yes”.
The RF Security Code
4Select a different security code.
The conformation
5Press the CODE SET button on the remote control.
The CABLE and TV FUNCTION indicators flash.
CODE SET
FUNCTION
CABLE TV SAT
6Enter the three digit security code you selected for the receiver in step 4 above.
7Press the enter button.
The remote control and Digital Satellite Receiver are now set to a new security code.
ENTER
8Select “OK” to save your changes.
The Remote Control display appears.
34