REAR VIEW
The rear of the unit is illustrated in Figure 4. From left to right are the following:
1.The four 16-input blocks of VCR connectors in the form of screw-type connectors with associated mating plugs (one shown in Block 1) running from the left rear to middle right of the unit
2.The VCRC-P output relay (one per unit)
3.RS-422 input/output communication connectors (RJ-45 type)
4.One DB-9 type connector for factory use only
5.The grouped input power functions, consisting of input power terminals, a fuse and an ON/OFF switch
Figure 4. Rear View of CM9760-VCRC-P
6 | Pelco Manual C1943M (9/99) |
