Important Safeguards and Warnings, Description

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1.Installation and servicing should only be done by qualified service personnel and con- form to all local codes.

2.Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclo- sure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture.

3.Only use replacement parts recommended by Pelco.

4.After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the exposed parts have not been connected to line circuitry.

5.The installation method and materials should be capable to supporting four times the weight of the enclosure, pan/tilt, camera and lens combination.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous volt- age constituting a risk of electric shock is present within this unit.

This symbol indicates that there are impor- tant operating and maintenance instructions in the literature accompanying this unit.

C A U T I O N :

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

DESCRIPTION

NOTE: Currently the VCRC-P supports the fol- lowing make and model of VCR:

•Pelco TLR2096 96-hour time-lapse recorder.

The CM9760-VCRC-P is another optional accessory of the System 9760®. The VCRC-P gives security and surveillance operators the ability to automatically or manually control ap- propriate VCRs from the 9760 matrix system. It is designed to remotely control seven basic VCR functions (on Pelco’s TLR2096) using resistive ladder remote control.

Some of the more important features of the VCRC-P unit are as follows:

•Each unit can handle up to 64 VCRs.

•Each unit controls seven VCR functions: play, stop, fast forward, reverse, pause, record and eject.

•Up to 39 units can be chained together giving a total of up to 2,496 VCRs that can be controlled from a single Sercom port on the CM9760-CC1.

•There is one relay output per unit.

•The unit is powered by an auto-ranging power supply.

•Unique, one rack-unit chassis (1.75 inches or 4.45 cm) accommodates multiple types of mounting.

•Transparent system software operates with the CM9760-IRC, the CM9760-VCRC, the CM9760-VCRC-P, as well as the CM9760-REL.

Pelco Manual C1943M (9/99)