WATCHING TV
5Channel Selection
Select channels by using [CH K/L] or [the Number buttons].
Use [CH K / L] or [the Number buttons] to select the memorized channels. 
or
Using [the Number buttons]
TV
- When selecting analog channel 12
5Volume Adjustment
This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described.
Use [VOL. X/Y] to adjust the audio volume.
Volume 20 
•The volume bar will be displayed at the bottom of the TV screen when adjusting the volume.
•The volume bar will automatically disappear in a few seconds.
Press [MUTE 
] to turn off and on the sound.
Mute
DTV
-When selecting digital channel
•Be sure to press
•Press [CH RETURN] to return to the previously viewed channel.
•Only [the Number buttons] can be used to select the
•“Mute” is displayed on the TV screen for a few seconds.
Press [MUTE 
] again or use [VOL. X/Y] to recover the original volume.
About digital TV broadcasting:
With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality. Not all digital TV broadcasts are high definition (HD). To confirm whether your watching TV program is in HD, refer to the program guide, contact your cable/satellite provider or local TV stations.
What is the minor channel?
By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously. Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a single network.
5Sleep Timer
The sleep timer can be set to automatically turn off the unit after an incremental period of time.
1Press [SLEEP] to set the sleep timer.
SleepOff
• Sleep timer display appears on the TV screen.
2 Press [SLEEP] repeatedly to change the amount of time |
NTSC |
(analog mode) |
CH4 (Soccer) |
CH4 (Soccer) |
CH4 (Soccer) |
CH4 (Soccer) |
Air time |
| ATSC |
|
| |
18:00 |
| (digital mode) |
| ||
|
| ||||
|
|
| |||
18:30 | major channel |
|
| ||
| |||||
19:00 | major channel | minor channel |
| minor channel | |
|
| ||||
|
|
| |||
19:30 | major channel |
|
| ||
| |||||
20:00 | major channel |
| minor channel | ||
: can be changed by using [CH K / L]. | |||||
| |||||
until shut off. |
Sleep | 120min. |
•You can set your unit to turn off after a set period of time (from 30 to 120 minutes).
•Each press of [SLEEP] will increase the time by 30 minutes.
•After setup, the sleep timer display can be called up for checking by pressing [SLEEP].
To cancel the sleep timer
Press [SLEEP] repeatedly until “Sleep Off” is displayed on the TV screen.
Note:
• The sleep timer display will automatically disappear in a |
Note:
•“No Signal” will appear on the TV screen after the minor channel broadcast is over.
•“Audio only program“ message will appear on the TV screen, when you receive only sound signal.
14
few seconds. |
• When you disconnect the unit from the AC outlet or when |
a power failure occurs, the sleep timer setting will be |
canceled. |
EN