PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
Plug the incoming cable into the ANT. jack on the rear of the unit.
If your cable service supplies you with a converter box or if you use a satellite system, connect the box with this unit as shown below.
Cable | or | Antenna |
TV signal |
| |
|
|
Incoming cable from home Antenna / Cable Company (No Cable Box)
Cable Box or Satellite Box*
OR | IN |
| OUT |
Incoming cable from Cable Company or Satellite Antenna
Rear of the unit
ANT.
COAXIAL
ANT.
*NOTE
(DO NOT DISCONNECT FROM BOX) Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company.
NOTE:
Before plugging the antenna into the ANT. jack of the unit, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into the ANT. jack of the unit.
Bent pin
Cable | Plug |
|
|
| |
(Needs to be | (Straight pin) | |
straightened) |
| |
For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. jack before moving the unit.
CONNECTING TO AN EXTERNAL DEVICE (FRONT)
When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.AUX Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO
jacks of this unit.
Then use [SELECT] or [CH. K / L] until "AUX" appears on the screen.
ex. |
VCR or video camera, etc. |
(OUT) |
(OUT) |
NOTE: |
POWER
VOLUME | CH. | STOP | PLAY |
SELECT
To the Audio output jacks
Audio Cable (commercially available)
To the Video output jack
Video Cable (commercially available)
OPEN / CLOSE
VIDEO L - AUDIO - R HEADPHONE
[Front of the unit]
OPEN / CLOSE
(IN)
VIDEO L - AUDIO - R HEADPHONE
(IN)
When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.
6 
EN