Sylvania DVR90DF owner manual Timer Recording cont’d, Hints for Timer Recording

Page 34

Recording

Timer Recording (cont’d)

Hints for Timer Recording

• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

•If a disc is not on the tray, the indicator flashes and Timer Recording cannot be performed. In some cases, the indicator appears momentarily around the start point as the unit attempts to record. Please insert a recordable disc.

•When all the Timer Recording is completed, the indicator flashes.To play or eject the recorded disc, hit [POWER] first,

and then press [PLAYB] or [OPEN/CLOSE A].

•During Timer Recording or timer standby ( indicator is on the front display), any operations on the unit will not be avail-

able.To make these operations available, cancel the Timer Recording or timer standby first ( indicator disappears).

•To cancel the timer standby mode, hit [POWER].

•When the Start and the End time are the same, the length of the recording will be set for 24 hours.When the disc reaches at the end during the recording, the unit turns itself off.

•When the programmed Start and End time are earlier than the current time, the setting will not be accepted and be cleared for redoing.

•If the Start time is earlier and the End time is later than the current time, the recording will start right after you turn the power off.

The priority of overlapped settings

This unit records the programs according to priority if the timer programmings are overlapped.The timer programming set previously has priority.

A Timer Recording of lower priority will be canceled, start from the middle or stop on the way. Check the overlapped timer programmings and change the priority if necessary.

A programming set previously has priority

When the starting time is same:

A program set previously (PROG.A) has priority.

PROG.A

PROG. B

Actual

PROG. A

PROG. B

recording

 

 

The first 30 seconds (at the longest) will be cut off

When the recording time is partially overlapped: PROG.A will start after PROG. B is complete to be recorded.

PROG.A

PROG. B

 

 

Actual

PROG. B

PROG.A

recording

 

 

The first 30 seconds (at the longest) will be cut off

When some programming have been made at the end time of the programming currently being recorded:

A program set previously (PROG. B) has priority.

PROG.A

 

 

PROG. B

 

 

PROG. C

 

 

Actual

PROG.A

PROG. B

recording

 

 

The first 30 seconds (at the longest) will be cut off

When the recording time is entirely overlapped:

PROG.A will not be recorded.

PROG.A

 

PROG. B

 

Actual

PROG. B

recording

 

Note for DVD recording

•When the recording time of two programs are overlapped, or the End time of a pro- gram and the Start time of another is the same, the first 30 seconds (at the longest) of the subsequent program will be cut off.

•If the cut-off portion comes up to one minute or more, this program will be dis- played with error number E40 in the timer programming list.

When the End time of the programming currently being recorded and the Start time of the subsequent program are same:

If PROG.A is a DVD recording program, the beginning of the PROG. B may be cut off.

PROG.A

 

 

PROG. B

 

 

Actual

PROG.A

PROG. B

recording

 

 

The first 30 seconds (at the longest) will be cut off.

32

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Back of this unit Hit SetupHit Power to DVD+R/+RW discs can be played back only on this unitDate Select any blank line and hit EnterAfter all recordings, finalize your disc Hit repeatedly to select desired recording timeMenu Others EspañolBefore you start PrecautionsLaser Safety Make your contribution to the environmentPrecautions cont’d Before youInstallation Location Supplied AccessoryDolby Digital Recording Others EspañolTable of contents Before FeaturesSymbol DescriptionFunctional overview Front PanelFunctional overview cont’d Display menu Setting menus Recording speed Display messageDisc type Title/Track and Chapter markAfter you have completed connections ConnectionsConnection to a TV If your TV is not compatible with Progressive ScanWith this setup Connection to a cable box or satellite boxConnection to an Audio System AudioGetting started Easy DVD recordingEasy DVD recording Cont’d Speed ChannelChannel setting Getting channels auto- maticallyChannel setting cont’d Adding/deleting chan NelsUsing K / L, select Stereo or SAP. Hit Enter Using K / L, select Advanced Setting Menu. Hit EnterUsing K / L, select TV Audio Select. Hit Enter Selecting the TV stereo or SAPUsing K / L, select Clock Hit Enter Setting the clockAuto Clock Setting Using K / L, select Auto Clock Setting. Hit EnterSetting the clock cont’d Manual Clock SettingSelecting the TV aspect ratio Setting the daylight savIng time Information RecordingInformation on DVD recording Recordable discRestrictions on recording What is CPRM?Information on DVD recording cont’d Making discs playable in other DVD player FinalizeFormatting a disc Choosing the recording format of a blank discFormatting a disc cont’d Reformatting a discBasic recording Checking the recording picture and sound qualityTurn on the unit and load a recordable disc One-touch Timer RecordingRefer to Recording speed on Using K / L, enter start Timer RecordingTimer PROG. . In this CH SpeedInformation Hit Power Hit Enter when informa Hit Power to turn offChecking, canceling, or correcting the timer programming Using K / L, select yourHints for Timer Recording Timer Recording cont’dPriority of overlapped settings Video Settings for an external sourceConnection to an external source Before you start Connections Getting startedUsing K / L, select Disc Protect OFF ON. Hit Enter Settings for an external source cont’dSetting a disc to protect Recording from an external sourceFinalizing the discs Finalizing the discs cont’d Auto finalizePlaying discs Information on DVD playPlayback Basic playbackHit Stop C to stop play- back Playing MP3 disc When selecting trackBasic playback cont’d Hit Playb to start play- backPlaying discs using the disc menu Playing discs using the title menuFast forward / Fast reverse Special playbackResume play X1.5Step by step playback Special playback cont’dPause Slow forward / Slow reverse playZoom Marker SetupUsing / B, select icon. Hit Enter During playback, hit ZoomSearch Using Skip H / GUsing Display Title/Chapter searchTrack search Search cont’dTime search Repeat play Repeat/Random/Program playbackRandom playback Selecting the format of audio and video Switching subtitlesRepeat/Random/Program playback cont’d Program playUsing K / L, select a desired audio channel. Hit Enter Switching audio soundtrackSelecting the format of audio and video cont’d Angle will switch each time you Switching camera anglesReducing block noise Editing Information on disc editingEditing discs in Video mode Deleting titlesPutting names on titles Editing discs in Video mode cont’dTitle Name. Hit Enter Setting or clearing chapter markers Chapter Mark. Hit EnterOriginal list will appear Editing discs in VR mode OriginalUsing K / L, select Original. Hit Enter Original menu will appearUsing K / L, select Protect. Hit Enter Editing discs in VR mode Original cont’dSetting titles to protect To protect a whole disc DVD-RW VR mode OnlyConfirm the indication On OFF. Hit Enter Releasing titles from protectingKey icon will disappear from the title in the original list Using K / L, select Playlist. Hit Enter Editing discs in VR mode PlaylistHit Setup button. Using K / L, select Disc. Hit Enter PlayList will appearUsing K / L, select Delete. Hit Enter Editing discs in VR mode Playlist cont’dUsing K / L, select Scene Delete. Hit Enter Deleting parts of titlesUsing K / L, select Edit Title Name. Hit Enter C aYou cannot delete the first chapter of each title Using K / L, select Chapter Mark. Hit EnterAdd Setting pictures for thumbnails Picture for thumbnail will be setDividing a title Using K / L / s / B, select another title to combine. Hit Using K / L, select Title Combining. Hit EnterUsing s / B, select Yes Hit Enter Combining titlesUsing / B, select Yes Hit Enter Using K / L / / B, select Add New Title. Hit EnterUsing K / L / / B, select Delete Playlist. Hit Enter Adding titles to a PlaylistChanging the Setting menu Tour of the Setting menuUsing K / L, select a set Ting. Hit Enter Language settingUsing K / L, select Playback. Hit Enter Audio Language Default OriginalSubtitle Language Default OFF Language setting cont’dDisplay setting Using K / L, select Display. Hit EnterScreen Saver Default 10 minutes Audio settingOSD Language Default English Set the language for OSD It will only affect DVD discs during playbackUsing K / L, select a setting. Hit Enter Audio setting cont’dDigital Out Fast Forward with Audio Default OFF Settings for Parental lock levelDynamic Range Control Default on Record the password in case you forget itPassword has not been set yet Settings for Parental lock level cont’dPassword has been set already Change the password Symptom Remedy Power TroubleshootingOthers Troubleshooting cont’d Symptom RemedyCause Solution OthersError message Cause Solution Language codeGlossary Specifications GeneralEspañol Fácil grabación de DVDOriginal y Playlist modo VR ¿Qué son títulos y capítulos?Puede editar lo siguiente de la lista de títulos ¿Qué significa Original o Playlist?Limited Warranty
Top Page Image Contents