WATCHING TV
5Channel Selection
Select channels by pressing [CH K/L] or [the Number buttons].
•To select the memorized channels,
use [CH K/L] or [the Number buttons].
•To select the
To Use [the Number buttons]
TV
5Volume Adjustment
This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described.
Use [VOL X/Y] to adjust the audio volume.
VOL or VOL
VOLUME
-When selecting analog channel 12
1 
2
DTV
-When selecting digital channel
Be sure to press
channel number.
1 
2 
1
•Press [CHANNEL RETURN] to return to the previously viewed channel.
•When you select a channel larger than 100,
press [+100] first. Then use [the Number buttons] to press the lower
•The volume bar will be displayed at the bottom of the TV screen when adjusting the volume.
•The volume bar display will automatically disappear in a few seconds.
Press [MUTE] to turn off and on the sound.
MUTE
VOLUME
About digital TV broadcasting:
With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality.
What is the minor channel?
By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously.
Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a signal network.
Press [MUTE] again or [VOL X/Y] to recover the original volume.
5Switching Digital / Analog Mode
You can easily switch the DTV (ATSC) and TV (NTSC) with the remote control and enjoy viewing the TV programs with simple operation.
Press [DTV/TV] repeatedly to change the input mode.
DTV / T V | [ANALOG MODE] |
| |
| [DIGITAL MODE] |
NTSC (analog mode) [Air Time] 18:00
| 18:30 |
CH4 | 19:00 |
| 19:30 |
| 20:00 |
| 20:30 |
ATSC (digital mode)
CH4 | No signal | No signal |
| CH4 |
|
(high definition | TV) | |
CH4 | No signal | |
CH4 | No signal | |
CH4 | ||
Note:
•When you switch the analog mode to the digital mode, it may take a while until the digital channel selection is completed. The following message is displayed while switching the mode.
NOW SCANNING
major channel | minor channel |
: change automatically
: change manually by using [CH
/
]
Although, you cannot watch the high definition TV (HDTV) program, the unit converts the HDTV signal down to the standard definition TV signal.
Note:
•“No Signal” will appear on the TV screen after the minor channel broadcast is over.
12
EN