PICTURE menu
MIN:
The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN.
•The MIN setting is not suitable for high- quality pictures which contain very little noise.
MAX:
The level of DigiPure effect is set to the maximum. If you set the Super DigiPure function to AUTO but feel that the original picture quality has not been reproduced fully, change the setting from AUTO to MAX.
•The MAX setting is not suitable for low- quality pictures which contain a lot of noise.
OFF:
The Super DigiPure function is turned off.
OFF:
Colour DigiPure doesn't work. This gives a less clear picture than when this function is turned on.
COLOUR SYSTEM
The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
1Choose COLOUR SYSTEM. Then press the aor 3button
The
>> COLOUR SYSTEM
MAIN | SUB |
PAL | AUTO |
ENGLISH
MOVIE THEATRE
The MOVIE THEATRE function displays a cinema film picture more smoothly and naturally on the screen.
AUTO:
The television automatically recognizes the type of signal and turns the function on and off.
ON:
This function is turned on.
OFF:
This function is turned off.
•The motion may appear unnatural when viewing images with the NTSC colour system. When the MOVIE THEATRE function is set to AUTO or ON, the motion may appear unnatural when viewing images with the NTSC colour system.
Colour DigiPure
Makes the colour outline stand out and increases the sharpness giving a clearer picture.
ON:
Colour DigiPure works. Normally use with this function turned on.
OK
2Press the 5buttons to choose MAIN or SUB
MAIN:
You can change the colour system of the
SUB:
You can change the colour system of the
•Choose MAIN when a
3Press the 6buttons to choose the appropriate colour system. Then press the a button
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
23