JVC HV-32P37SUE, HV-28P37SUE manual EXT Setting

SET UP menu

6Turn on the VCR, and then press the abutton to transmit the data to VCR

The T-V LINKmenu disappears once the data transmission ends.

EXT SETTING

1Choose EXT SETTING, then press the a or 3button

The EXT SETTING menu appears.

7If you have another TV channel capable of being unscrambled with a Decoder, repeat steps 2 through 6

If the DECODER (EXT-2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following:

•Has the decoder been connected to the VCR properly according to the VCR and decoder instruction manuals?

•Has the decoder power been turned on?

•Can the TV channel be unscrambled with a decoder?

•Do you need to change the VCR settings in order to connect the decoder? Confirm that the VCR is set properly by rechecking the VCR Instruction manual.

> EXT SETTING

EXT-1	DUBBING
	EXT-2
EXT-3
EXT-5
TV	EXT-4

ID LIST

OK

S-IN

D0020-EN

2Follow the operation description of a function you want to use and operate the function

S-IN:

You can enjoy high-quality picture of the 2 S-VIDEO signal (Y/C signal).

ID LIST:

You can have a name corresponding to the devices connected for each EXT terminal.

DUBBING:

You can choose a signal source to be output from an EXT-2 terminal.

„S-IN (S-VIDEO input)

You can connect a device (such as an S-VHS VCR) to enjoy the high-quality picture of the S-VIDEO signal (Y/C signal).

Preparation:

•First read the device’s instruction manual and “Additional preparation” on page 39 to connect the device to the TV properly. Second, follow the device’s instruction manual to set the device so that it sends an S-VIDEO signal (Y/C signal) to the TV.

•Do not set S-IN (S-VIDEO input) to an EXT terminal connected to a device which cannot output an S-VIDEO (Y/C signal). If it is set wrongly, a picture cannot appear.

36