JVC HV-32P37SUE, HV-28P37SUE „ If the TV does not respond to the remote control, „ Other issues

Page 88

Troubleshooting

•When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the TV.

•Since this TV is designed to make full use of the resolution of the original video source, the motion may appear unnatural when the video source is input with 625p progressive-scanning component signals. If this occurs, change the output setting of the connected device to 625i interlace- scanning component signal output.

„Poor sound

•Have you adjusted BASS or TREBLE properly? If not, follow the description “BASS” or“TREBLE” on page 27.

•When TV channel reception is poor, it can be hard to hear stereo or bilingual sound. In this case, follow the description “STEREO / I • II” on page 27 to hear the sound more easily by changing it to a mono sound.

„If the TV does not respond to the remote control

•Have the batteries of the remote control worn out? Follow the description “Putting the batteries into the Remote control” on page 6 and replace them with new batteries.

•Have you attempted to use the remote control from the sides or rear of the TV or from more than seven metres away from the TV? Use the remote control in the front of your TV or from less than seven metres away.

•When you are viewing a teletext programme, you cannot operate the menus. Press the b button to return to the ordinary TV programme, and then try operating the menus.

•If the TV suddenly stops responding, press the main power button on the TV and turn off the main power. Press the main power button again to turn on the TV. If the TV returns to a normal state, it is not a failure.

„Other issues

•When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the #(standby) button to turn on the TV once again. If the TV goes back to normal, there is no problem.

•When the TV is receiving a wide-screen signal (WSS) or a signal from an external device affecting the screen size, the ZOOM mode automatically changes. When you want to resume the previous ZOOM mode, press the cbutton again.

•If you bring magnetised equipment such as a speaker near to your TV, the picture may be warped or unnatural colours may appear at the corners of the screen. In this case, keep the equipment away from your TV. If speakers cause this to happen, use magnetically-shielded speakers instead.

•A picture may be tilted due to the earth’s magnetic field. If so, use the “PICTURE TILT” on page 35 to correct the tilt.

•It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a malfunction. This is the time required for the image to stabilize before it can be displayed.

•The TV may make a crackling sound due to a sudden change in temperature. The picture or sound may be normal. If you hear crackling sounds frequently while you are viewing the TV, there may be other causes. As a precaution, ask your service technician to inspect it.

•Touching the screen may cause you to feel a slight electric shock due to its static electricity. This is unavoidable due to the construction of the picture tube. It is not a problem with the TV. You can rest assured that this static discharge is not harmful.

•When set to 2-pictures multi, adjust the headphone sound with HEADPHONE VOLUME in the SOUND menu.

42

Page 87 Page 89
Image 88
Page 87 Page 89
Contents HV-32P37SUE HV-28P37SUE Do not block the TV’s ventilation openings or holes S.T. demonstrationContents Setting up your TV Connecting the aerial and VCR„ If connecting a VCR, follow a → → C „ If not connecting a VCR, followConnecting the power cord to the AC outlet Putting the batteries into the Remote controlInitial settings Press the Main power button onPress the a button „ ACI function Press the a button to display the T-V Link menuIf you do not have a T-V Link compatible VCR connected If ACI START/ACI Skip appears in the Auto Program menuIf ACI Error is displayed in the Auto Program menu Link Functions„ Downloading the data to VCR Turn on the VCR Press the a button„ Pre-set Download When Feature not Available is displayed„ Direct Rec Turn the Main power on Turn the TV on from standby modeAdjust the volume TV buttons and functionsRemote control buttons and functions Standby modeTurn the TV on or off from Press the #Standby button to turn the TV on or offTo return to a TV channel Choose a TV channel and watch images from external devicesTo use the Programme number PR 0 AV Press the rqbuttons to adjust the volume Information functionChannel number display Time display„ Choose the Zoom mode Zoom functionUsing the Freeze function „ Adjusting the visible area of the picture3D Cinema Sound function Return to TV channel instantlyUsing the MULTI-PICTURE To cancel the Freeze functionFunction Pictures multiSet the VCR/TV/DVD Switch to the VCR or DVD position Operating a JVC brand VCR or DVD playerTo return the multi-picture to one screen DVDUsing the List Mode Press Bbutton to engage the List modeTeletext function Basic operationHold Sub-pageReveal SizeCancel Press H Cancel buttonUsing the TV’s menu Buttons used to operate the menusPress the Hbutton to display the menu bar Types of menu Picture menuPicture menu „ Digital VNR Features„ Super DigiPure „ Movie Theatre „ Colour System„ Colour DigiPure „ 43 Auto Aspect Press the 6buttons to choose a Zoom modeChoose 43 Auto Aspect then press the abutton Sound menu Features menu Sleep TimerChild Lock „ To set the Child Lock functionTo reset the Child Lock function „ To view a locked TV channelPress the 6buttons to choose a TV channel Press the Number buttons to enter the ID numberAppearance Blue BackAuto Program SET UP menuEDIT/MANUAL Press the a button to complete the settings „ Basic operation„ Move Choose EDIT/MANUAL, then press the aor 3button„ Delete „ IDPress the yellow button to delete the TV channel Press the red button to start the ID function„ Manual „ InsertFrance Picture Tilt LanguageDecoder EXT-2 EXT Setting „ S-IN S-VIDEO inputID List DubbingTo cancel the S-IN S-VIDEO input setting „ ID ListPreparation Press the 5or 6buttons to choose an EXT terminal„ Dubbing Press the 6buttons to choose a name. Then press the abuttonTo erase a name assigned to the EXT terminal Press the 5buttons to choose the arrow from the menuBefore connecting anything Connecting the external devicesAdditional preparation „ Connecting headphones „ Video/sound signal output from the EXT-2 terminal„ Connecting Speakers/Amplifier „ T-V Link compatible VCRCH/CC numbers ChannelCH/CC numbers Troubleshooting „ If you cannot turn on the TV„ If you cannot turn off the TV „ No picture/No sound„ Poor sound „ Operation disabled„ Other concerns Troubleshooting Specifications Design and specifications subject to change without noticeVictor Company of JAPAN, Limited HV-32P37SJE HV-28P37SJE How to replace the fuse „ Warning„ If in doubt consult a competent electrician „ Guidelines for safe operationS.T. demonstration Troubleshooting Specifications Connecting the aerial and video cassette recorder VCR Connecting the power cord to the AC outlet Press the 5and 6buttons to choose the country where you are Press the abuttonHelplineon1890-582500 „ Downloading the data to VCR Link functions Refer to the pages in brackets for details Remote control buttons and functions Example PR 6 → press PR 12 → press 1and Adjust the volume Press the c button to display the Zoom menu Press the a button to display Zoom mode indicator Using the MULTI-PICTURE function Operating a JVC brand VCR or DVD player Press Bbutton to go into the List mode Press and hold down the a Store button Press the G Index buttonCancel Using the TV’s menu Picture menu Features „ Movie Theatre „ 43 Auto Aspect Balance Child Lock BBC1 BBC2 ITV CH4 CH5 Appearance This function deletes a TV channel you do not want to list Follow the description for a Function you want to usePress the a button to give a channel name ID to a TV channel When the Country setting is United Kingdom Continue to step United KingdomPress the number buttons to enter the remaining CH number Ireland„ CH/CC Number Choose Picture TILT, then press the aor 3button EXT Setting „ ID List EXT-2 EXT-3 EXT-5 Connecting external equipment „ Video or sound signal output from the EXT-2 terminal „ No picture or no sound „ If the TV does not respond to the remote control „ Other issuesWe may change the design and specifications without notice United Kingdom IrelandLCT1452-001A-U
Top Page Image Contents