AUTO PRESET CH
If you switch wires (e.g. between antenna and CATV) or if you move the TV to a different area after the initial setting, you need to perform AUTO PRESET CH again. This function lets you easily select the receivable channels with [CH K/L] and the TV memorizes them even if you switch wires.
1 | 2 | 3 |
| |
4 | 5 | 6 |
| |
7 | 8 | 9 |
| |
| CHANNEL | |||
| RETURN | |||
CH K / L | 0 | +100 |
| |
| CH |
| ||
|
| VOL X | ||
| VOL | VOL | ||
|
| CH |
| |
MENU | INPUT |
|
| |
MENU | SLEEP | MUTE | ||
SELECT | ||||
|
|
| ||
NOTE:
•Make sure if the TV is connected to antenna or cable. When aerial antenna is connected, select “AUTO PRESET CH (TV)” or “(TV/DTV)” at step 3. When connected to CATV, select “AUTO PRESET CH (CATV)”.
TV
When scanning TV or CATV only
1Select analog mode by pressing [DTV/TV].
2Display the MENU screen.
•Press [MENU] on the remote control. The following MENU screen is displayed.
PICTURE CHANNEL SET [ENG]/ESP/FRA
3Select "CHANNEL SET".
•Using [CH K/L] on the remote control, select "CHANNEL SET".
PICTURE
CHANNEL SET [ENG]/ESP/FRA
• Press [VOL X] on the remote control.
28
4*Only for TV channels
•Using [CH K/L] on the remote control, select "AUTO PRESET CH(TV)".
ADD/DELETE
AUTO PRESET CH(TV)
AUTO PRESET CH(CATV)
AUTO PRESET CH(DTV/TV)
•Press [VOL X] on the remote control. Scanning and memorizing the channels auto- matically starts.
AUTO PRESET CH(TV)
•When the scanning and memorizing are com- pleted, the memorized smallest channel in the analog broadcasting will be displayed.
4*Only for CATV channels
•Using [CH K/L] on the remote control, select "AUTO PRESET CH(CATV)".
ADD/DELETE
AUTO PRESET CH(TV)
AUTO PRESET CH(CATV)
AUTO PRESET CH(DTV/TV)
•Press [VOL X] on the remote control. Scanning and memorizing the channels auto- matically starts.
AUTO PRESET CH(CATV)
•When the scanning and memorizing are com- pleted, the memorized smallest channel in the CATV will be displayed.
EN