Video Settings, Audio Settings, 22 -EN | Sylvania DVL1000 specification

VIDEO SETTINGS

1Press the SET UP button.

SETUP

1. LANGUAGE

● The setup screen will appear. 2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter

Exit

AUDIO SETTINGS

1 Press the SET UP button.

SETUP

1. LANGUAGE

● The setup screen will appear. 2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter

Exit

2Press the ▲/▼ or numeric buttons to select

VIDEO, and then press the
ENTER button.	SETUP/VIDEO
	1. TV MODE	[4:3LB]
	2. STILL MODE	[AUTO]
	Enter,	Back Exit

2Press the ▲/▼ or numeric buttons to select

AUDIO, and then press the

ENTER button.	SETUP/AUDIO
ENTER button.	1. DIGITAL OUT
	1. DIGITAL OUT
	2. VIRTUAL 3D	[OFF]
	Enter,	Back	Exit

3Press the ▲/▼ or numeric buttons to select an item, and then press the ENTER button.

SETUP/VIDEO

TV MODE

1. 4:3 PAN&SCAN

2. 4:3 LETTER BOX

3. 16:9 WIDE

Enter, Back Exit

SETUP/VIDEO

STILL MODE

1. AUTO

2.FIELD

3.FRAME

•Full-height pictures are shown with one or both sides trimmed.

•Wide screen (full-width) pictures are shown with black bars at top and bottom.

•If a wide screen TV is connected.

•AUTO is normally selected.

•If pictures are blurred in auto mode.

•For showing motionless pictures at high resolution in still mode.

SETUP/AUDIO

DIGITAL OUT

1.	PCM	[48kHz]
2. DOLBY DIGITAL [OFF]
3.	DTS	[OFF]

Enter, BackExit

SETUP/AUDIO

VIRTUAL 3D

1. OFF

2. ON

•Sets the sample rate for playing a disc recorded with high sound quality.

•When a Dolby Digital decoder is connected.

•When a DTS decoder is connected.

•To activate the 3D effect.

Enter,Back Exit

4	Press the ▲/▼ or numeric buttons to select the
	desired item, and then press the ENTER but-
	ton.

5	Press the SET UP button.
● The setup mode will be canceled and the ordinary

4Press the ▲/▼ or numeric buttons to select the desired item, and then press the ENTER button.

●If PCM, DOLBY DIGITAL or DTS is selected on the DIGITAL OUT setting screen, press the ▲/▼ or numeric buttons again to select a further item, and then press the ENTER button.

screen will appear.

Note

●If the numeric buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

SETUP/AUDIO

PCM

1.48kHz

2.96kHz

Enter,Back Exit

•Audio signals are converted to 48 kHz/16 bit signals for digital output when playing a DVD recorded with high sound quality (48 kHz/ 20 bit/24 bit, 96 kHz).

•Sound is reproduced at the high quality of

96 kHz when playing a DVD recorded with high sound quality (48 kHz/20 bit/24 bit, 96 kHz). For 48 kHz discs or when 4:3 LETTER BOX is selected in TV MODE, sound is reproduced at 48 kHz.

SETUP/AUDIO

DOLBY DIGITAL

1.OFF

2.ON • When a Dolby Digital decoder built-in amplifier