Using the On-Screen Display

Your TV display has an on-screen display (OSD) that allows you to select the proper input source, make adjustments to the image and audio settings, select to view Picture-In-Picture, Picture- Outside-Picture, and Picture-By-Picture, and set parental controls.

Using Your Remote Control With the OSD

NOTE: You can access and make selections to the OSD using the volume and channel buttons on the side panel of the TV display or you can use the remote control. Except where noted, this section describes how to use the OSD with the remote control.

1To enter the OSD, press the Menu button.

Eight icons appear along the bottom of the screen.

MAIN MENU

EXIT	INPUT	PICTURE	AUDIO	PIP/POP	SIZE &	PARENTAL SETUP
	SELECT	SETTINGS	SETTINGS	PBP	POSITION	CONTROLS

2Use the left and right buttons (volume buttons) to move between the icons. The icon appears highlighted as you move through the menu.

3To select an option, push the Menu button when the icon is highlighted.

4A new menu appears for that selected option. Use the up and down buttons (channel buttons) to move through the various settings.

NOTE: A red arrow appears next to the setting as you navigate through the options. A check mark appears next to the option that you have selected.

5Use the left and right buttons (volume buttons) and the Enter button to adjust or select settings.

NOTE: You can select Exit or press the Menu button at any time to return to the main menu.

6After you have made your selections, push the Menu button to return to the main menu.

7To exit the OSD, select the Exit icon and press Enter.

Using the On-Screen Display