Closed Caption
CLOSED CAPTION
BACK |
|
CLOSED CAPTION | ON |
CAPTION MODE | CC1 |
In the Closed Caption menu, you can select On, Off, or Mute. If you select Mute, CC automatically displays when you use the Mute button on the remote control.
You can also select a specific mode, CC1, CC2, and CC4 are standard closed captioning and CC3 provides closed captioning in a secondary language.
Sleep Timer
Sleep Timer allows you to select an increment of time after which the TV display turns off automatically. You can select from 10 minutes to 3 hours.
OSD Setup
SETUP
EXIT
OSD SETTINGS
CHANNEL SETUP
LANGUAGE
FACTORY RESET
DVI SETTINGS
SLEEP TIMER
CLOSED CAPTION
OSD setup allows you to adjust the appearance of the OSD, to change the language of the OSD (see "Selecting Your OSD Language" on page 24) and to restore factory settings.
Use OSD Hold Time to increase or decrease the amount of time the OSD appears. The maximum amount of time is 60 seconds.
In the Setup menu you can select TV Button lock to lock the OSD and the side panel buttons. When this option is enabled, only the power button functions. To unlock the OSD and side panel buttons:
1. Press the Menu button on the TV.
A message appears stating that the TV is locked.
2.While the message is on the TV, press the channel up and volume decrease button simultaneously.
If you are using the DVI connector, you may need to verify the following settings:
Source — The default setting is Auto. The T V automatically detects if a computer (PC) or video device is being used. If the image does not display correctly, you can select the source, PC or Video, depending on the device you are using.
Color — The default color space is RGB. If the colors are not displaying correctly, you can change the setting to YUV.
Using the
29