Pip/Pop/Pbp

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

You can view two active sources simultaneously using Picture-In-Picture (PIP), Picture-Outside- Picture (POP), or Picture-By-Picture (PBP).

For POP, you can select from three different POP options:

•POP1 — One large POP window to the left and a smaller, centered window on the right.

•POP3 — One large POP window to the left and three smaller, vertically-aligned windows on the right.

•POP12 — One large, centered POP window surrounded by twelve smaller windows.

	The remote control offers the following
PIP/POP/PBP	PIP/POP/PBP options:
	•Use the PIP button or the POP PBP button
BACK	on the remote control to turn on and off PIP,
PIP/POP/PBP	POP, and PBP.
PIP/POP/PBP	PIP

TRANSPARENCY	38	•If you are in PIP, POP, or PBP mode, use the
	38	SWAP button on the remote control to
		SWAP button on the remote control to

SIZE	38	switch between the two windows.
		switch between the two windows.

HORIZONTAL POSITION	38	•Use the POS button on the remote to
VERTICAL POSITION		•Use the POS button on the remote to
VERTICAL POSITION	38	change which corner of the screen the PIP
	38
PIP SOURCE
PIP SOURCE	TV	window appears.
		window appears.
AUDIOS SOURCE	MAIN	In the OSD, you can adjust the
		In the OSD, you can adjust the
		Transparency, the Size, and H (horizontal)
		and V (vertical) position of the PIP/POP/PBP

windows. When you are selecting the horizontal orientation, - moves the window left and + moves the window to the right. When you are adjusting the vertical orientation, 0 is at the top of the screen and 100 is at the bottom of the screen.

POP Scan Mode allows you to select Sequential or Float. Float mode plays the source for selected channels that appear in the windows. Sequential rotates through each window and plays all of the preselected channels. The rotation runs through all the available channels before it starts again at the lowest channel.

Using the On-Screen Display