m s u p p o r t . d e l l . c o m
OSD Messages
While using your TV display, the following messages may appear.
Message | Possible Solution |
|
|
Auto Adjust | No action required, the TV display is performing an auto |
| adjustment. |
w w w . d e l l . c o
Out of Range
No Video Input
TV Button Lock
In Power Save Mode
Press any key on keyboard or move mouse
Check the optimal resolution settings.
You may need to download a new video driver. For more information, go to support.dell.com.
1 Check all cables are properly connected.
2 Ensure the proper source is selected in the Input Select menu. See "Input Select Menu" on page 24 for more information.
To unlock, press Menu on your remote control, select Setup.
Use the side panel buttons to unlock the OSD and side panel buttons:
1 Press the Menu button.
A message appears stating that the OSD and buttons are locked.
2 While the message is on the screen, press the volume decrease and channel up buttons on the side panel simultaneously.
A message appears stating that the OSD and buttons are unlocked.
If you have a computer connected to the TV display and there is no signal detected, the TV display goes in to sleep mode. The power light is amber when the TV display in is sleep mode.
Press any key on the keyboard or move the mouse to wake the TV display.
In Power Save Mode Please Check Video Signal
Self Test
If you are using a video device and it has been inactive for
30 minutes the TV display goes in to power save mode. The power light is amber when the TV display is in power save mode.
Appears for computer source when there is nothing plugged in. Select VGA or DVI from Input Select menu and nothing is plugged in. Plug a computer in to the VGA or DVI.
36
Troubleshooting Your TV Display