SUBJECT : IMPLOSION
1.All direct viewed picture tubes are equipped with an integral implo- sion protection system, but care should be taken to avoid damage during installation. Avoid scratching the tube. If scratched, replace it.
2.Use only recommended factory replacement tubes.
SUBJECT : TIPS ON PROPER INSTALLATION
1.Never install any receiver in
2.Avoid conditions of high humidity such as : Outdoor patio installa- tions where dew is a factor. Near steam radiators where steam leakage is a factor, etc.
3.Avoid placement where draperies may obstruct rear venting. The customer should also avoid the use of decorative scarves or other coverings which might obstruct ventilation.
4.Wall and shelf mounted installations using a commercial mounting kit, must follow the factory approved mounting instructions. A receiver mounted to a shelf or platform must retain its original feet(or the equivalent thickness in spacers) to provide adequate are flow across the bottom, bolts or screws used for fasteners must not touch and parts or wiring. Perform leakage test on cus- tomized installations.
5.Caution customers against the mounting of a receiver on sloping shelf or a tilted position, unless the receiver is properly secured.
6.A receiver on a
7.Caution customers against the use of a cart or stand which has not been listed by underwriters laboratories, inc. For use with their specific model of television receiver or generically approved for use with T.V.’s of the same or larger screen size.
4