PREPARATION
NAME OF EACH PART OF PROJECTOR
FRONT
CARRY HANDLE
INFRARED
REMOTE RECEIVER
EXHAUST VENTS
HOT AIR EXHAUSTED !
Air blown from Exhaust Vents is hot. When using or installing projector, following precautions should be taken.
● Do not put any flammable object near these vents.
● Keep front grills at least 3’(1m) away from any object, especially heat- sensitive object.
● Do not touch this area, especially screw and metallic part. This area will become hot while a projector is used.
This projector detects internal temperature and automatically controls operating power of Cooling Fans.
PROJECTION LENS LENS COVER
BACK
TOP CONTROLS
AND INDICATORS
POWER CORD CONNECTOR
BOTTOM
LAMP COVER
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
INFRARED
REMOTE RECEIVER
SPEAKER
TERMINALS
AND CONNECTORS
AIR FILTER
AIR INTAKE VENTS (Back and Bottom)
This projector is equipped with Cooling Fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possible risk of fire and malfunction.
●Do not cover vent slots.
●Keep back and bottom clear of any object. Obstructions may block cooling air.
7