Eiki LC-XB33N owner manual ① Select button, ② Point Volume +/- buttons, ③ Auto SETUP/CANCEL button

Part Names and Functions

Top Control

	⑥
⑩	⑤
⑨	④
⑧	③
	②
⑦	①

①SELECT button

–Execute the selected item (p.23).

–Expand or compress the image in the Digital zoom mode (p.38).

②POINT ▲▼◄► (VOLUME +/–) buttons

–Select an item or adjust the value in the On-Screen Menu (p.23).

–Pan the image in the Digital zoom + mode (p.38).

–Adjust the volume level (Point ◄► buttons) (p.26).

③AUTO SETUP/CANCEL button

–Correct vertical keystone distortion and adjust computer display parameters such as Fine sync., Total dots, and Picture position (pp.25, 46).

–Display the image in SD card or return to the menu bar in Memory Viewer menu.

Refer to the owner's manual of "Network Set-up and Operation" and owner's manual of Memory viewer.

④POWER indicator

–Lights red when the projector is in stand-by mode.

–Lights green during operations.

–Blinks green in the Power management mode (p.51).

⑤LAMP REPLACE indicator

Lights yellow when the projection lamp reaches its end of life (pp.60,68).

⑥WIRELESS indicator

Turn green when the projector is in the network mode.

⑦MENU button

Open or close the On-Screen Menu (p.23).

⑧INPUT button

Select an input source (pp.29–30, 39–40).

⑨ON/STAND–BY button

Turn the projector on or off (pp.21–22).

⑩WARNING TEMP.. indicator

–Lights red when the projector detects an abnormal condition.

–Blinks red when the internal temperature of the projector exceeds the operating range (pp.57,68).

11