Part Names and Functions
Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer.
1 | Before operating the wireless mouse, connect |
| |
your computer and the projector with a USB |
| ||
| cable (not supplied). See “Connecting to a | PRESENTATION POINTER | |
| Computer” on page 18. When the Pointer | button | |
| function is used, the wireless mouse is not | Move the pointer on the screen | |
| available. | with this button. | |
2 | When a USB cable is connected to the | ||
Acts as right (click) mouse | |||
computer and the projector, turn on the | |||
| projector first, then the computer. If you turn | button while the projector and a |
on the computer first, the wireless mouse | computer are connected with a | |
USB cable. | ||
function may not operate correctly. | ||
|
L-CLICK button
Acts as left (click) mouse button while the projector and a computer are connected with a USB cable.
Remote Control Code
The eight different remote control codes (Code
1 | Press and hold the MENU and IMAGE buttons for | |||
more than five seconds to switch between the codes. | ||||
| The code switches sequentially for one pressing the | |||
| IMAGE button. See the list below. | |||
2 | To initialize the remote control code, slide the RESET/ | |||
| The initial code is set to Code 1. | |||
|
|
|
|
|
|
| Remote Control Code | Number of Times |
|
|
| Pressing IMAGE |
| |
|
|
| Button |
|
|
| Code 1 | 1 |
|
|
| Code 2 | 2 |
|
|
| Code 3 | 3 |
|
|
| Code 4 | 4 |
|
|
| Code 5 | 5 |
|
|
| Code 6 | 6 |
|
|
| Code 7 | 7 |
|
|
| Code 8 | 8 |
|
While pressing the MENU button, press the IMAGE button number of times corresponding to the remote control code.
MENU button
IMAGE button
14