Eiki LC-XB33N Computer Input Computer System Selection, Selecting Computer System Manually

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 69-70.)

One of the following messages may appear when:

	The projector cannot recognize the connected
Auto
	signal conforming to the provided PC Systems.
	The “Auto” is displayed on the System Menu
	box and the Auto PC Adjustment function works
	to display proper images. If the image is not
	projected properly, a manual adjustment is
	required (pp.33-34).

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 63.)

	The preset system is manually adjusted in the
Mode 1
	PC Adjust Menu. The adjusted data can be
	stored in Mode 1–5 (pp.33-34).
	PC Systems provided in this projector is chosen.
SVGA 1
	The projector chooses a proper system provided
	in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

PC System Menu

The Auto PC Adjustment function operates to adjust the projector.

Selecting Computer System Manually

PC system can also be selected manually.

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ◄► buttons to move the red
	frame pointer to the PC System Menu icon.
2	Use the Point ▲▼ buttons to move the red arrow
	pointer to the desired system and then press the

SELECT button.

PC System Menu

The PC System Menu icon

Selected system is displayed.

Systems in this dialog box can be selected.

Customized Mode (1–5) set in the PC Adjust Menu (pp.33–34).

31