Eiki LC-XB33N Computer Input, Input Source Selection RGB Computer 1 Analog/Computer, Notes

Computer Input

Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )

Direct Operation

Choose either Computer 1 (Analog) or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ◄► buttons to move the red
	frame pointer to the Input Menu icon.
2	Use the Point ▲▼ buttons to move the red arrow
	pointer to either Computer 1 (Analog) or Computer 2,
	and then press the SELECT button.
3	When selecting Computer 1 (Analog), RGB input
	source will be selected directly.

When selecting Computer 2, the Source Select Menu appears. Move the pointer to RGB and then press the SELECT button.

Notes:

•Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.50).

•Computer 2 is not displayed when the COMPUTER IN 2/MONITOR OUT terminal is set as Monitor out. (p.50)

•Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only RGB signal.

Top Control	INPUT button
	Computer 1 (Analog)
	Computer 1 (Digital)
	Computer 2
	Video
	Wired
	Wireless
Remote Control
	COMPUTER button
	Computer 1 (Analog)
	Computer 1 (Digital)
	Computer 2

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 1 (Analog) and press the SELECT button.

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Move the pointer (red arrow) to RGB.

29