Eiki LC-X71L owner manual Computer Input Manual PC Adjustment

Page 27

COMPUTER INPUT

MANUAL PC ADJUSTMENT

This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which may not be tuned by the Multi-Scan system of this projector. If this happens, the projector cannot reproduce proper image and it may be recognized as a flickering; non-synchronized; non-centered; or skewed picture.

Manual PC Adjustment of this projector enables you to precisely adjust several parameters to match with those special signal formats. This projector has 10 independent memory areas to store those parameters manually adjusted, which allows you to recall setting for a specific computer whenever you use it.

Note: The PC ADJUST Menu cannot be operated when the digital signal input on the DVI terminal is selected on PC SYSTEM Menu. (p.25)

1

Press the MENU button to display the On-Screen Menu.

 

Press the POINT LEFT/RIGHT buttons to move the red frame

 

pointer to the PC ADJUST Menu icon.

2

Press the POINT UP/DOWN buttons to move the red frame

 

pointer to the desired item, and then press the SELECT

button. An Adjustment dialog box appears. Press the POINT LEFT/RIGHT buttons to adjust the value.

Fine sync

Eliminate a flicker from the display. Press the POINT LEFT/RIGHT buttons to adjust the value. (From 0 to 31.)

Total dots

Adjust the number of total dots in one horizontal period. Press the POINT LEFT/RIGHT buttons to adjust the number to match your PC image.

Position H

Press the POINT LEFT/RIGHT buttons to adjust the horizontal picture position.

Position V

Press the POINT LEFT/RIGHT buttons to adjust the vertical picture position.

Current mode

Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer.

Clamp

Adjusts the clamp level. When the image has a dark bars, try this adjustment.

Display area H

Adjust the horizontal area displayed by this projector. Press the POINT LEFT/RIGHT buttons to decrease/increase the value.

Display area V

Adjust the vertical area displayed by this projector. Press the POINT LEFT/RIGHT buttons to decrease/increase the value.

PC ADJUST MENU

PC ADJUST Menu icon

Move the red frame pointer to an item and press the SELECT button.

Shows status (Stored/Free) of the selected Mode.

Selected Mode

Press the POINT LEFT/RIGHT buttons to adjust the value.

Press the SELECT button at this icon to adjust “Clamp,” “Display area H,” or “Display area V.”

Current mode

Press the SELECT button at the Current mode icon to show information of the computer connected.

Press the SELECT button at this icon to display the previous items.

27

Image 27
Contents LC-X71L Lensless Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsAC Power Cord Requirement ComplianceEsperanza Rancho Santa Margarita CA 92688-2132, U.S.A Table of Contents Component Video Features and DesignComputers Color SystemsName of Each Part of Projector PreparationSETTING-UP Projector Connecting AC Power Cord200 240 V AC 100 150 200 250 300 400 Size Lens InstallationPreparation Positioning Projector ScreenInstalling Projector in Proper Position Preparation Adjustable FeetPreparation Moving Projector Terminals of Projector Connecting ProjectorTerminals Projector Connecting to ComputersExternal Speaker Terminals Front of the projectorConnecting to Video Equipment BNC Cable Scart Cable Video Cable Audio Cable RCA xTerminals Remote Control Operation Before OperationLaser Pointer Function Before Operation Remote Control Batteries InstallationLamp Indicator TOP Controls and IndicatorsEXT. SP Switch Lamp Replace IndicatorHOW to Operate ON-SCREEN Menu ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Turning on the Projector What is PIN code?Basic Operation Turning on / OFF ProjectorBasic Operation Turning OFF the Projector Keystone Correction Adjusting ScreenFocus Adjustment Lens Shift AdjustmentNo Show Function Sound AdjustmentTimer Function Basic Operation Picture Freeze FunctionInput Menu Computer InputSelecting Input Source RGB AV HdcpSvga Selecting Computer SystemAutomatic MULTI-SCAN System PC System MenuPC Adjust Menu PC AdjustmentAuto PC Adjustment Pointer to the PC Adjust Menu iconComputer Input Manual PC Adjustment Quit ResetMode free StorePicture Image Select Image Level SelectImage Select Menu Picture Screen Adjustment Picture Screen SelectScreen Menu Video Input AV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NPicture level adjusted for picture with fine tone CinemaImage button Standard Cinema Provides image at the wide screen ratio Provides image at the normal video aspect ratioPicture Image Picture Image AdjustmentsImage Adjust Menu Pointer ModeDEL Color MMenu Color PaletteSharpness White balance RedWhite balance Green White balance BlueSetting Setting MenuSetting Menu Language Logo PIN code lock LogoLogo select CaptureAnamorphic Power managementCeiling RearLamp control Remote controlTo change the code of the remote control On startNot used Wireless Mouse modeProjector mode USBTo Change the PIN Code PIN code lock To Change the PIN Code Lock settingChanging the PIN code lock setting PIN code lockLamp counter Factory default Exit the Setting MenuQuit Right Click button Wireless MouseAppendix Left Click buttonMaintenance Cleaning Projection Lens Appendix AIR Filters Care and CleaningLamp Replacement Appendix Lamp Replace Counter Turn the projector on and press the Menu button to displayLamp counter Troubleshooting Check the mouse setting on your computer Remote controlCheck the remote control code in the remote control SeeSETTING onImage Select Screen PC AdjustMenu Tree SystemSound SettingImage Adjust Image SelectResolution Appendix Compatible Computer SpecificationsIndicators and Projector Condition Temperature inside the projector is abnormally high Ready indicator lights greenAC power cord and contact the dealer or the service Projector is in the Power management modeProjection Image Size Diagonal Technical SpecificationsTerminal Mini DIN 8-PIN Pin Configuration Appendix Configurations of TerminalsTerminal HDB15-PIN Pin Configuration Terminal DVI 24-pin Pin ConfigurationPJ Link Notice Lens ReplacementTo the sales and service engineer Appendix Optional PartsLogo PIN Code Lock No Appendix PIN Code Number MemoDimensions Key to better communications Canada

LC-X71, LC-X71L specifications

The Eiki LC-X71L and LC-X71 are high-performance LCD projectors designed to meet the diverse needs of modern presentations and entertainment. Both models are built with exceptional technology and numerous features that enhance their usability in various environments, from boardrooms to classrooms.

At the heart of the Eiki LC-X71L and LC-X71 projectors is their advanced LCD technology, which ensures vibrant color reproduction and sharp image quality. With a native resolution of XGA (1024x768 pixels), these projectors deliver crisp visuals, making them ideal for detailed presentations and video playback. The high brightness levels, typically around 5000 lumens, ensure excellent visibility even in well-lit spaces, making it easier for audiences to see the content without strain.

One of the standout features of the Eiki LC-X71L and LC-X71 is their robust connectivity options. Both models are equipped with multiple input terminals, including HDMI, VGA, and composite video, allowing users to connect a variety of devices ranging from computers to gaming consoles. Moreover, the projectors support various input sources, such as USB and even wireless connectivity via optional adapters, promoting flexibility in presentation setups.

The Eiki LC-X71L and LC-X71 are also designed with user-friendliness in mind. The intuitive on-screen menu and straightforward remote control simplify navigation and operation, allowing users to adjust settings quickly. The projectors include features such as auto keystone correction, which automatically adjusts the image for optimal alignment, reducing setup time and improving productivity.

In terms of durability, both models feature a long lamp life, often exceeding 5000 hours in eco mode. This longevity enhances cost-effectiveness, minimizing the need for frequent lamp replacements and contributing to lower total ownership costs. Additionally, both projectors have efficient cooling systems to maintain optimal performance and prolong operational life.

Overall, the Eiki LC-X71L and LC-X71 projectors combine advanced technology, user-friendly features, and robust performance to cater to various applications. Whether for business meetings, educational purposes, or casual viewing, these projectors provide an exceptional visual experience that meets the high demands of today’s users.