Eiki LC-X71L Preparation Positioning Projector, Lens Installation, Screen, Distance

PREPARATION

POSITIONING PROJECTOR

NOTE: The figures below are only for the Model LC-X71.

The projection lens is not provided with the Model LC-X71L.

●This projector is designed to project on a flat projection surface.

●Projector can be focused from 4.6’ (1.4 m) ~ 48.3’ (14.7 m).

●Refer to the figure below to adjust the screen size.

A ROOM LIGHT

Brightness in a room has a great influence on the picture quality. It is recommended to limit ambient lighting in order to provide the best image.

			47.3’(14.4m)
		35.4’(10.8m)	Max. Zoom	400”
		23.6’(7.2m)
11.8’(3.6m)		300”		308”
		200”
4.6’(1.4m)
		231”	Min. Zoom
	100”
40”		154”
	77”
31”

Screen		Max. Zoom	40”	100”	150”	200”	250”	300”	400”
Size
		Min. Zoom	31”	77”	115”	154”	192”	231”	308”
	Distance		4.6’ (1.4 m)	11.8’ (3.6 m)	17.7’ (5.4 m)	23.6’ (7.2m)	29.5’ (9.0 m)	35.4’ (10.8 m)	47.3’ (14.4 m)

LENS SHIFT ADJUSTMENT

Projection lens can be moved up and down with the motor-driven Lens shift function. This function makes it easy to provide projected image where you want. The U/D ratio can be adjusted 10:0 ~ 1:1 (see Figure below). See page 22 for operation.

Highest (10 : 0) Lowest (1 : 1)

LENS INSTALLATION

Before setting up the projector, install a projection lens on the projector.

1.Before installation, check the area where the projector is used and prepare a suitable lens. For the specifications of a projection lens, contact sales dealer where you purchased the projector.

2.For installation, refer to the installation manual of the optional lens.

COVER CAP

NOTE:

• When installing the lens, remove the cover cap of the projector.

9